UPD78F9200MA-CAC-A Renesas Electronics America, UPD78F9200MA-CAC-A Datasheet - Page 74

• Manufacturer Part Number: UPD78F9200MA-CAC-A
• Description: MCU 8BIT 1KB FLASH 128B RAM
• Manufacturer: Renesas Electronics America
• Series: 78K0S/Kx1+r

Specifications of UPD78F9200MA-CAC-A

• Package / Case: *
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 10MHz
• Number Of I /o: 7
• Core Processor: 78K0S
• Program Memory Type: FLASH
• Ram Size: 128 x 8
• Program Memory Size: 1KB (1K x 8)
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Peripherals: LVD, POR, PWM, WDT
• Core Size: 8-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -

<R>
<R>
<R>
<R>
5.1
peripheral hardware, and a circuit that generates a clock (interval time generation clock) to be supplied to the
watchdog timer and 8-bit timer H1 (TMH1).
5.1.1
CHAPTER 4 PORT FUNCTIONS for details.
5.1.2
72
The clock generators include a circuit that generates a clock (system clock) to be supplied to the CPU and
The following three types of system clock oscillators are used.
The system clock source is selected by using the option byte. For details, refer to CHAPTER 15 OPTION BYTE.
When using the X1 and X2 pins in PD78F920x, and the EXCLK pin in PD78F950x as I/O port pins, refer to
Notes 1.
The following circuit is used as a clock oscillator for interval time generation.
High-speed internal oscillator
This circuit internally oscillates a clock of 8 MHz (TYP.). Its oscillation can be stopped by execution of the STOP
instruction.
If the High-speed internal oscillator is selected to supply the system clock, the X1 and X2 pins in PD78F920x,
and the EXCLK pin in PD78F950x can be used as I/O port pins.
Crystal/ceramic oscillator
This circuit oscillates a clock with a crystal/ceramic oscillator connected across the X1 and X2 pins. It can
oscillate a clock of 2 MHz to 10 MHz. Oscillation of this circuit can be stopped by execution of the STOP
instruction.
External clock input circuit
This circuit supplies a clock from an external IC to the X1 pin
Internal clock supply can be stopped by execution of the STOP instruction.
If the external clock input is selected as the system clock, the X2 pin can be used as an I/O port pin.
Low-speed internal oscillator
This circuit oscillates a clock of 240 kHz (TYP.). Its oscillation can be stopped by using the low-speed internal
oscillation mode register (LSRCM) when it is specified by the option byte that its oscillation can be stopped by
software.
Functions of Clock Generators
System clock oscillators
Clock oscillator for interval time generation
2.
PD78F920x only
PD78F920x: X1 pin, PD78F950x: EXCLK pin
Note 1
CHAPTER 5 CLOCK GENERATORS
User’s Manual U18172EJ3V0UD
Note 2
. A clock of 2 MHz to 10 MHz can be supplied.
Note 1