UPD78F9200MA-CAC-A Renesas Electronics America, UPD78F9200MA-CAC-A Datasheet - Page 62

• Manufacturer Part Number: UPD78F9200MA-CAC-A
• Description: MCU 8BIT 1KB FLASH 128B RAM
• Manufacturer: Renesas Electronics America
• Series: 78K0S/Kx1+r

Specifications of UPD78F9200MA-CAC-A

• Package / Case: *
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 10MHz
• Number Of I /o: 7
• Core Processor: 78K0S
• Program Memory Type: FLASH
• Ram Size: 128 x 8
• Program Memory Size: 1KB (1K x 8)
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Peripherals: LVD, POR, PWM, WDT
• Core Size: 8-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -

<R>
(2)
port mode register 2 (PM2). When the P20 to P23 pins are used as an input port, an on-chip pull-up resistor can be
connected in 1-bit units by using pull-up resistor option register 2 (PU2).
therefore, depending on the selected system clock oscillator. The following two system clock oscillators can be used.
60
Port 2 is a 4-bit I/O port with an output latch. Each bit of this port can be set to the input or output mode by using
This port can also be used for timer I/O, and external interrupt request input.
The P23 pin is also used as the EXCLK pin of the system clock oscillator. The functions of the EXCLK pin differs,
The system clock oscillation is selected by the option byte. For details, refer to CHAPTER 15 OPTION BYTE.
Reset signal generation sets port 2 to the input mode.
Figures 4-5 to 4-7 show the block diagrams of port 2.
<1>High-speed internal oscillator
<2>External clock input
PD78F950x
The P23 pin can be used as I/O port pin.
The P23 pin is used as the EXCLK pin to input an external clock, and therefore it cannot be used as an I/O
port pin.
CHAPTER 4 PORT FUNCTIONS
User’s Manual U18172EJ3V0UD