SAK-XC866-1FRA AB Infineon Technologies, SAK-XC866-1FRA AB Datasheet - Page 21

• Manufacturer Part Number: SAK-XC866-1FRA AB
• Description: IC MCU 8BIT FLASH 38-TSSOP
• Manufacturer: Infineon Technologies
• Series: XC8xxr

Specifications of SAK-XC866-1FRA AB

• Core Processor: XC800
• Core Size: 8-Bit
• Speed: 86MHz
• Connectivity: SSI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 19
• Program Memory Size: 4KB (4K x 8)
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 38-TSSOP
• Data Bus Width: 8 bit
• Data Ram Size: 750 B
• Interface Type: UART, SSC
• Maximum Clock Frequency: 26.67 MHz
• Number Of Programmable I/os: 27
• Number Of Timers: 3
• Operating Supply Voltage: 3.3 V, 5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: SP000235420

3.2.1
The XC866 memory protection strategy includes:
• Read-out protection: The Flash Memory can be enabled for read-out protection and
• Program and erase protection: The Flash memory in all devices can be enabled for
Flash memory protection is available in two modes:
• Mode 0: Only the P-Flash is protected; the D-Flash is unprotected
• Mode 1: Both the P-Flash and D-Flash are protected
The selection of each protection mode and the restrictions imposed are summarized in
Table
Table 4
BSL mode 6, which is used for enabling Flash protection, can also be used for disabling
Flash protection. Here, the programmed password must be provided by the user. A
password match triggers an automatic erase of the read-protected Flash contents, see
Table 5
then disabled upon the next reset.
For XC866-2FR and XC866-4FR devices:
The selection of protection type is summarized in
Data Sheet
Mode
Activation
Selection
P-Flash contents
can be read by
P-Flash program
and erase
D-Flash contents
can be read by
D-Flash program Possible
D-Flash erase
ROM memory is always protected.
program and erase protection.
4.
and
Memory Protection Strategy
Table
Flash Protection Modes
6, and the programmed password is erased. The Flash protection is
0
Program a valid password via BSL mode 6
MSB of password = 0
Read instructions in the
P-Flash
Not possible
Read instructions in any program
memory
Possible, on the condition that bit
DFLASHEN in register MISC_CON
is set to 1 prior to each erase
operation
17
Table
5.
1
MSB of password = 1
Read instructions in the
P-Flash or D-Flash
Not possible
Read instructions in the
P-Flash or D-Flash
Not possible
Not possible
Functional Description
V1.2, 2007-10
XC866