SAK-XC866-1FRA AB Infineon Technologies, SAK-XC866-1FRA AB Datasheet - Page 81

• Manufacturer Part Number: SAK-XC866-1FRA AB
• Description: IC MCU 8BIT FLASH 38-TSSOP
• Manufacturer: Infineon Technologies
• Series: XC8xxr

Specifications of SAK-XC866-1FRA AB

• Core Processor: XC800
• Core Size: 8-Bit
• Speed: 86MHz
• Connectivity: SSI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 19
• Program Memory Size: 4KB (4K x 8)
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 38-TSSOP
• Data Bus Width: 8 bit
• Data Ram Size: 750 B
• Interface Type: UART, SSC
• Maximum Clock Frequency: 26.67 MHz
• Number Of Programmable I/os: 27
• Number Of Timers: 3
• Operating Supply Voltage: 3.3 V, 5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: SP000235420

3.16
Timer 2 is a 16-bit general purpose timer (THL2) that has two modes of operation, a
16-bit auto-reload mode and a 16-bit one channel capture mode. If the prescalar is
disabled, Timer 2 counts with an input clock of PCLK/12. Timer 2 continues counting as
long as it is enabled.
Table 29
Mode
Auto-reload Up/Down Count Disabled
Channel
capture
Data Sheet
Timer 2
Timer 2 Modes
Description
• Count up only
• Start counting from 16-bit reload value, overflow at FFFF
• Reload event configurable for trigger by overflow condition only, or by
• Programmble reload value in register RC2
• Interrupt is generated with reload event
Up/Down Count Enabled
• Count up or down, direction determined by level at input pin T2EX
• No interrupt is generated
• Count up
• Count down
• Count up only
• Start counting from 0000
• Reload event triggered by overflow condition
• Reload value fixed at 0000
• Capture event triggered by falling/rising edge at pin T2EX
• Captured timer value stored in register RC2
• Interrupt is generated with reload or capture event
negative/positive edge at input pin T2EX as well
– Start counting from 16-bit reload value, overflow at FFFF
– Reload event triggered by overflow condition
– Programmble reload value in register RC2
– Start counting from FFFF
– Reload event triggered by underflow condition
– Reload value fixed at FFFF
RC2
H
77
, overflow at FFFF
H
H
, underflow at value defined in register
H
H
Functional Description
H
V1.2, 2007-10
H
XC866