SAK-XC866-1FRA AB Infineon Technologies, SAK-XC866-1FRA AB Datasheet - Page 75

• Manufacturer Part Number: SAK-XC866-1FRA AB
• Description: IC MCU 8BIT FLASH 38-TSSOP
• Manufacturer: Infineon Technologies
• Series: XC8xxr

Specifications of SAK-XC866-1FRA AB

• Core Processor: XC800
• Core Size: 8-Bit
• Speed: 86MHz
• Connectivity: SSI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 19
• Program Memory Size: 4KB (4K x 8)
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 38-TSSOP
• Data Bus Width: 8 bit
• Data Ram Size: 750 B
• Interface Type: UART, SSC
• Maximum Clock Frequency: 26.67 MHz
• Number Of Programmable I/os: 27
• Number Of Timers: 3
• Operating Supply Voltage: 3.3 V, 5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: SP000235420

3.11.2
In UART modes 1 and 3, Timer 1 can be used for generating the variable baud rates. In
theory, this timer could be used in any of its modes. But in practice, it should be set into
auto-reload mode (Timer 1 mode 2), with its high byte set to the appropriate value for the
required baud rate. The baud rate is determined by the Timer 1 overflow rate and the
value of SMOD as follows:
3.12
Setting bit FDM in register FDCON to 1 configures the fractional divider to normal divider
mode, while at the same time disables baud rate generation (see
fractional divider is enabled (FDEN = 1), it functions as an 8-bit auto-reload timer (with
no relation to baud rate generation) and counts up from the reload value with each input
clock pulse. Bit field RESULT in register FDRES represents the timer value, while bit
field STEP in register FDSTEP defines the reload value. At each timer overflow, an
overflow flag (FDCON.NDOV) will be set and an interrupt request generated. This gives
an output clock
The output frequency in normal divider mode is derived as follows:
Data Sheet
Baud Rate Generation using Timer 1
Normal Divider Mode (8-bit Auto-reload Timer)
f
MOD
that is 1/n of the input clock
Mode 1, 3 baud rate
f
MOD
=
f
DIV
71
=
---------------------------------------------------- -
32 2
×
----------------------------- -
256 STEP
2
×
f
SMOD
DIV
–
×
, where n is defined by 256 - STEP.
1
(
256 TH1
×
f
PCLK
–
Functional Description
)
Figure
29). Once the
V1.2, 2007-10
XC866
[3.1]
[3.2]