SAK-XC866-1FRA AB Infineon Technologies, SAK-XC866-1FRA AB Datasheet - Page 73

• Manufacturer Part Number: SAK-XC866-1FRA AB
• Description: IC MCU 8BIT FLASH 38-TSSOP
• Manufacturer: Infineon Technologies
• Series: XC8xxr

Specifications of SAK-XC866-1FRA AB

• Core Processor: XC800
• Core Size: 8-Bit
• Speed: 86MHz
• Connectivity: SSI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 19
• Program Memory Size: 4KB (4K x 8)
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 38-TSSOP
• Data Bus Width: 8 bit
• Data Ram Size: 750 B
• Interface Type: UART, SSC
• Maximum Clock Frequency: 26.67 MHz
• Number Of Programmable I/os: 27
• Number Of Timers: 3
• Operating Supply Voltage: 3.3 V, 5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: SP000235420

• 8-bit reload value (BR_VALUE) for the baud rate timer defined by register BG
The following formulas calculate the final baud rate without and with the fractional divider
respectively:
The maximum baud rate that can be generated is limited to
clock of 26.7 MHz, the maximum achievable baud rate is 0.83 MBaud.
Standard LIN protocal can support a maximum baud rate of 20kHz, the baud rate
accuracy is not critical and the fractional divider can be disabled. Only the prescaler is
used for auto baud rate calculation. For LIN fast mode, which supports the baud rate of
20kHz to 115.2kHz, the higher baud rates require the use of the fractional divider for
greater accuracy.
Table 26
settings and deviation errors. The fractional divider is disabled and a module clock of
26.7 MHz is used.
Table 26
Baud rate
19.2 kBaud
9600 Baud
4800 Baud
2400 Baud
The fractional divider allows baud rates of higher accuracy (lower deviation error) to be
generated.
Data Sheet
baud rate
lists the various commonly used baud rates with their corresponding parameter
=
Table 27
---------------------------------------------------------------------------------- - where 2
16 2
Typical Baud rates for UART with Fractional Divider disabled
×
baud rate
BRPRE
lists the resulting deviation errors from generating a baud rate of
Prescaling Factor
(2
1 (BRPRE=000
1 (BRPRE=000
2 (BRPRE=001
4 (BRPRE=010
BRPRE
×
f
=
PCLK
(
BR_VALUE
---------------------------------------------------------------------------------- -
16 2
)
×
BRPRE
B
B
B
B
)
)
)
)
+
×
f
69
PCLK
1
(
)
BR_VALUE
Reload Value
(BR_VALUE + 1)
174 (AE
174 (AE
174 (AE
87 (57
H
H
H
H
)
BRPRE
)
)
)
+
f
PCLK
1
)
×
×
Functional Description
/32. Hence, for a module
STEP
-------------- -
(
256
BR_VALUE
Deviation Error
-0.22 %
-0.22 %
-0.22 %
-0.22 %
V1.2, 2007-10
+
1
XC866
) 1
>