UPD78F0552MA-FAA-AX Renesas Electronics America, UPD78F0552MA-FAA-AX Datasheet - Page 799

• Manufacturer Part Number: UPD78F0552MA-FAA-AX
• Description: MCU 8BIT 16-SSOP
• Manufacturer: Renesas Electronics America
• Series: 78K0/Kx2-Lr

Specifications of UPD78F0552MA-FAA-AX

• Core Processor: 78K/0
• Core Size: 8-Bit
• Speed: 10MHz
• Connectivity: I²C, LIN, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 9
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

<R>
78K0/Kx2-L
A.4 Debugging Tools (Hardware)
A.4.1 When using in-circuit emulator
A.4.2 When using on-chip debug emulator with programming function QB-MINI2
A.5 Debugging Tools (Software)
R01UH0028EJ0400 Rev.4.00
Sep 27, 2010
QB-78K0KX2L
In-circuit emulator
QB-MINI2
On-chip debug emulator with
programming function
Target connector specifications
ID78K0-QB
Integrated debugger
SM+ for 78K0
System simulator
Remark Download the software for operating the QB-MINI2 from the download site for development tools
(http://www2.renesas.com/micro/en/ods/index.html).
This in-circuit emulator serves to debug hardware and software when developing application
systems using the 78K0/Kx2-L microcontrollers. It supports to the integrated debugger (ID78K0-
QB). This emulator should be used in combination with a power supply unit and emulation probe,
and the USB is used to connect this emulator to the host machine.
This on-chip debug emulator serves to debug hardware and software when developing
application systems using the 78K0/Kx2-L. It is available also as flash memory
programmer dedicated to microcontrollers with on-chip flash memory. When using this
as on-chip debug emulator, it should be used in combination with a connection cable (16-
pin cable), a USB interface cable that is used to connect the host machine, and the
78K0-OCD board.
16-pin general-purpose connector (2.54 mm pitch)
This debugger supports the in-circuit emulators for the 78K0 microcontrollers. The
ID78K0-QB is Windows-based software.
It has improved C-compatible debugging functions and can display the results of tracing
with the source program using an integrating window function that associates the source
program, disassemble display, and memory display with the trace result. It should be
used in combination with the device file (DF780588).
System simulator is Windows-based software.
It is used to perform debugging at the C source level or assembler level while simulating
the operation of the target system on a host machine.
Use of system simulator allows the execution of application logical testing and
performance testing on an independent basis from hardware development, thereby
providing higher development efficiency and software quality.
System simulator should be used in combination with the device file (DF780588).
APPENDIX A DEVELOPMENT TOOLS
785