SAK-TC1766-192F80HL BD Infineon Technologies, SAK-TC1766-192F80HL BD Datasheet - Page 42

• Manufacturer Part Number: SAK-TC1766-192F80HL BD
• Description: IC MCU 32BIT FLASH PG-LQFP-176
• Manufacturer: Infineon Technologies
• Series: TC17xxr

Specifications of SAK-TC1766-192F80HL BD

• Core Processor: TriCore
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: ASC, CAN, MLI, MSC, SSC
• Peripherals: DMA, POR, WDT
• Number Of I /o: 81
• Program Memory Size: 1.5MB (1.5M x 8)
• Program Memory Type: FLASH
• Ram Size: 108K x 8
• Voltage - Supply (vcc/vdd): 1.42 V ~ 1.58 V
• Data Converters: A/D 2x10b; A/D 32x8b,10b,12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 176-LFQFP
• Packages: PG-LQFP-176
• Max Clock Frequency: 80.0 MHz
• Sram (incl. Cache): 108.0 KByte
• Can Nodes: 2
• A / D Input Lines (incl. Fadc): 36
• Program Memory: 1.5 MB
• For Use With: B158-H8539-G2-X-7600IN - KIT STARTER TC176X SERIES
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Other names: KT1766192F80HLBDXT; SAK-TC1766-192F80HLBDINTR

Preliminary
The SSC supports full-duplex and half-duplex serial synchronous communication up to
40.0 MBaud (@ 80 MHz module clock). The serial clock signal can be generated by the
SSC itself (Master Mode) or can be received from an external master (Slave Mode). Data
width, shift direction, clock polarity and phase are programmable. This allows
communication with SPI-compatible devices. Transmission and reception of data is
double-buffered. A shift clock generator provides the SSC with a separate serial clock
signal. Seven slave select inputs are available for Slave Mode operation. Eight
programmable slave select outputs (chip selects) are supported in Master Mode.
Features
•
•
•
•
•
•
•
Data Sheet
Master and Slave Mode operation
– Full-duplex or half-duplex operation
– Automatic pad control possible
Flexible data format
– Programmable number of data bits: 2 to 16 bits
– Programmable shift direction: LSB or MSB shift first
– Programmable clock polarity: Idle low or idle high state for the shift clock
– Programmable clock/data phase: Data shift with leading or trailing edge of the shift
Baud rate generation from 40.0 Mbit/s to 610.36 bit/s (@ 80 MHz module clock)
Interrupt generation
– On a transmitter empty condition
– On a receiver full condition
– On an error condition (receive, phase, baud rate, transmit error)
Flexible SSC pin configuration
Seven slave select inputs SLSI[7:1] in Slave Mode
Eight programmable slave select outputs SLSO[7:0] in Master Mode
– Automatic SLSO generation with programmable timing
– Programmable active level and enable control
clock
38
Functional Description
V1.0, 2008-04
TC1766