QB-MINI2-EE NEC, QB-MINI2-EE Datasheet - Page 29

• Manufacturer Part Number: QB-MINI2-EE
• Description: EMULATOR, PROGRAMMER, MINICUBE2
• Manufacturer: NEC
• Type: Debug Emulatorr

Specifications of QB-MINI2-EE

• Svhc: No SVHC (18-Jun-2010)
• Mcu Supported Families: MINICUBE2
• Silicon Family Name: V850, 78K0R, 78K0S
• Ic Product Type: On-Chip Debug Emulator
• Kit Contents: MINICUBE2, USB Cable, Target Cable, 78K0-OCD Board
• Features: On-Chip Debugging, Flash Memory Programming,

3.2.3 System startup procedure
(1) Preparation and installation of software
(2) Switch setting
Caution Do not change the switch setting while the USB cable is connected.
(3) Connecting the target system
This section describes the system startup procedure. Observe the following order.
The following software is required to perform on-chip debugging. For details on preparation and installation of
software, refer to the setup manual supplied with MINICUBE2.
Set the mode select switch to ″M2″. Set the power select switch by referring to Table 3-5.
Connect MINICUBE2 to the target system as shown in Figure 3-10, before the power to the target system is
turned on.
Note The maximum rating of the current is 100 mA, so do not use MINICUBE2 with the target system with
3
5
T
• Debugger
• USB driver
• Device file (may be unnecessary when using a partner manufacture’s debugger)
Setting
the higher current rating. The power is always supplied after MINICUBE2 is connected to the host
machine.
Target system
Target system
CHAPTER 3
3 V is supplied from MINICUBE2 to the target system
5 V is supplied from MINICUBE2 to the target system
Power supply of the target system is used.
MINICUBE2 detects the power for the target system.
The detected power is also used as the power supply for the communication interface.
Figure 3-10. Connecting MINICUBE2 to Target System
Table 3-5. Setting of Power Select Switch
HOW TO USE MINICUBE2 WITH V850 MICROCONTROLLER
16-pin target cable
16-pin target cable
User’s Manual U18371EJ1V0UM
Description
Note
Note
.
.
MINICUBE2
MINICUBE2
29