QB-MINI2-EE NEC, QB-MINI2-EE Datasheet - Page 4

• Manufacturer Part Number: QB-MINI2-EE
• Description: EMULATOR, PROGRAMMER, MINICUBE2
• Manufacturer: NEC
• Type: Debug Emulatorr

Specifications of QB-MINI2-EE

• Svhc: No SVHC (18-Jun-2010)
• Mcu Supported Families: MINICUBE2
• Silicon Family Name: V850, 78K0R, 78K0S
• Ic Product Type: On-Chip Debug Emulator
• Kit Contents: MINICUBE2, USB Cable, Target Cable, 78K0-OCD Board
• Features: On-Chip Debugging, Flash Memory Programming,

4
1. Circumstances not covered by product guarantee
2. Safety precautions
• If the product was disassembled, altered, or repaired by the customer
• If it was dropped, broken, or given another strong shock
• Use at overvoltage, use outside guaranteed temperature range, storing outside guaranteed
• If power was turned on while the USB cable or connection to the target system was in an
• If the cable of the USB cable, the target cable, or the like was bent or pulled excessively
• If the product got wet
• If this product is connected to the target system when there is a potential difference between the
• If the connectors or cables are plugged/unplugged while this product is in the power-on state.
• If excessive load is applied to the connectors or sockets.
• If a metal part of the interface connector or another such part comes in contact with an electrostatic
• If specifications other than those specified are used for the USB port
• The product may become hot depending on the status of use. Be careful of low temperature burns
• Be careful of electrical shock. There is a danger of electrical shock if the product is used as
• Do not use a device that was used for on-chip debugging as the official product.
temperature range
unsatisfactory state
GND of this product and GND of the target system.
charge
and other dangers due to the product becoming hot.
described above in 1 Circumstances not covered by product guarantee.
General Precautions for Handling This Product
User’s Manual U18371EJ1V0UM