QB-MINI2-EE NEC, QB-MINI2-EE Datasheet - Page 92

• Manufacturer Part Number: QB-MINI2-EE
• Description: EMULATOR, PROGRAMMER, MINICUBE2
• Manufacturer: NEC
• Type: Debug Emulatorr

Specifications of QB-MINI2-EE

• Svhc: No SVHC (18-Jun-2010)
• Mcu Supported Families: MINICUBE2
• Silicon Family Name: V850, 78K0R, 78K0S
• Ic Product Type: On-Chip Debug Emulator
• Kit Contents: MINICUBE2, USB Cable, Target Cable, 78K0-OCD Board
• Features: On-Chip Debugging, Flash Memory Programming,

92
(4) Connecting the USB cable
Caution Do not change the switch setting while the USB cable is connected.
(5) Applying power to target system
(6) QB-Programmer startup
Connect MINICUBE2 to the host machine as shown in Figure 4-36, before the power to the target system is
turned on.
When the power select switch is set to ″ T ″ , the mode LED flashes white after connection.
When the power select switch is set to ″ 3 ″ or ″ 5 ″ , the mode LED glows white after connection.
The power is always supplied after MINICUBE2 is connected to the host machine with the USB cable.
Turn on power to the target system. This step is not necessary if the power select switch is set to ″ 3 ″ or ″ 5 ″ .
The mode LED glows white after power application.
Start the QB-Programmer from the Start menu of Windows.
QB-Programmer startup.
A series of basic operations after this step is described in the following section. For detailed usage of the
QB-Programmer, refer to the QB-Programmer Programming GUI Operation User's Manual.
MINICUBE2
MINICUBE2
CHAPTER 4
Figure 4-36. Connecting MINICUBE2 to Host Machine
HOW TO USE MINICUBE2 WITH 78K0 MICROCONTROLLER
User’s Manual U18371EJ1V0UM
USB cable
USB cable
The mode LED glows green after
Host machine
Host machine