CDB42L52 Cirrus Logic Inc, CDB42L52 Datasheet - Page 71

• Manufacturer Part Number: CDB42L52
• Description: Eval Bd LP Codec W/Class D Spkr Driver
• Manufacturer: Cirrus Logic Inc

Specifications of CDB42L52

• Main Purpose: Audio, CODEC
• Embedded: Yes, FPGA / CPLD
• Utilized Ic / Part: CS42L52
• Primary Attributes: 4 Stereo Audio Inputs, Stereo Line and Speaker Outputs, S/PDIF Inputs and Outputs
• Secondary Attributes: GUI, I2C, SPI, USB Interfaces
• Description/function: Audio CODECs
• Operating Supply Voltage: 5 V
• Product: Audio Modules
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: CS42L52
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 598-1505

DS680F1
6.36.2 DSP Engine Overflow (Read Only)
6.36.3 PCMx Overflow (Read Only)
6.36.4 ADCx Overflow (Read Only)
6.37
6.37.1 Battery Compensation
6.37.2 VP Monitor
BATTCMP
7
Battery Compensation (Address 2Fh)
Indicates the over-range status in the DSP data path.
Indicates the over-range status in the PCM mix data path.
Indicates the over-range status in the ADC signal path.
Configures automatic adjustment of the speaker volume when VP deviates from VPREF[3:0].
Configures the internal ADC that monitors the VP voltage level.
Notes:
1. The internal ADC that monitors the VP supply is enabled automatically when BATTCMP is enabled,
2. When enabled, VPMONITOR remains enabled regardless of the PDN bit setting.
DSPxOVFL
0
1
Application:
PCMxOVFL
0
1
Application:
ADCxOVFL
0
1
Application:
BATTCMP
0
1
Application:
VPMONITOR
0
1
regardless of the VPMONITOR setting. Conversely, when BATTCMP is disabled, the ADC may be
enabled by enabling VPMONITOR; this provides a convenient battery monitor without enabling
battery compensation.
VPMONITOR
6
DSP Overflow Status:
No digital clipping has occurred in the data path after the DSP.
Digital clipping has occurred in the data path after the DSP.
“Analog Outputs” on page 29
PCM Overflow Status:
No digital clipping has occurred in the data path of the PCM mix
of the DSP.
Digital clipping has occurred in the data path of the PCM mix of the DSP.
“Analog Outputs” on page 29
ADC Overflow Status:
No clipping has occurred anywhere in the ADC signal path.
Clipping has occurred in the ADC signal path.
“Analog Inputs” on page 26
Automatic Battery Compensation
Disabled
Enabled
“Maintaining a Desired Output Level” on page 34
VP ADC Status
Disabled
Enabled
Reserved
5
Reserved
4
5/13/08
VPREF3
3
VPREF2
(“PCM Mixer Channel x Volume” on page
2
VPREF1
1
CS42L52
VPREF0
0
58)
71