RCLXT16706FE Intel, RCLXT16706FE Datasheet - Page 131

• Manufacturer Part Number: RCLXT16706FE
• Manufacturer: Intel

Specifications of RCLXT16706FE

• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (min): 2.97V
• Operating Supply Voltage (max): 3.63V
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Lead Free Status / Rohs Status: Not Compliant

4.4.2.2
Datasheet
4.4.2.1.7 F2 Byte: Order Wire Channel (Optional)
The F2 source is specified by register T_SC_RSOH, combined with input control pin TPOHINS,
as coming from:
4.4.2.1.8 Z3/F3 Byte: Order Wire Channel (Optional)
The F3/Z3 source is specified by register T_HPT_C, combined with input control pin TPOHINS,
as coming from:
4.4.2.1.9 Z4/K3, Z5/N1 Bytes: Unused
Those POH bytes are normally unused. Their source is specified by register T_HPT_C, combined
with input control pin TPOHINS, as coming from:
4.4.2.1.10 STS-1/STM-0 Stuff Columns
In OC-1 mode, the 30
configured via register T_HPT_C to be part of the payload or not. When configured as stuff
columns, their contents are not part of the B3 BIP calculation, as they are not part of the VC-3.
These bytes are unused. When configured to be part of the payload, these bytes transport regular
traffic.
Transmit Multiplexer Section Adaptation Function
4.4.2.2.1 AU Pointer Generator
The inserted transmit AU pointer value (first H1 and H2 bytes) is a fixed value. The value is set via
register T_AU_PTS. It can be programmed to any value between 0 and 782. Invalid pointer values
(between 783 and 1023) may also be set via this register. For 155 Mb/s, 622 Mb/s, and 2.5 Gb/s
modes of operation, the unused H1 and H2 bytes indicate concatenation. The two SS bits are also
fully programmable via register T_AU_PTS. By default the four NDF bits are set to a value of
'0110' (no NDF).
•
•
•
•
•
•
•
•
•
•
•
The 64-Kbit/s dedicated serial TPOW1 input port.
The serial TPOH interface (TPOH input pin).
The incoming byte from the downstream data—when all POH bytes are configured in pass-
through mode.
The internal common unused Overhead byte transmit default value (all ‘0’s).
The 64-Kbit/s dedicated serial TPOW2 input port.
The serial TPOH interface (TPOH input pin).
The incoming byte from the downstream data—when all POH bytes are configured in pass-
through mode.
The internal common unused Overhead byte transmit default value (all '0's).
The serial TPOH interface (TPOH input pin).
The incoming byte from the downstream data—when all POH bytes are configured in pass-
through mode.
The internal common unused Overhead byte transmit default value (all '0's).
51/155/622/2488 Mbit/s SONET/SDH Cell/Packet Interface — Intel IXF6048
th
and 59
th
columns of the STS-1-SPE (designated as “stuff columns”) can be
131