PEF 20550 H V2.1 Infineon Technologies, PEF 20550 H V2.1 Datasheet - Page 355

• Manufacturer Part Number: PEF 20550 H V2.1
• Description: IC INTERFACE CTRLR PCM MQFP80
• Manufacturer: Infineon Technologies
• Series: ELIC®r

Specifications of PEF 20550 H V2.1

• Function: Line Card Controller
• Interface: ISDN, PCM
• Number Of Circuits: 1
• Voltage - Supply: 5V
• Current - Supply: 15mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 80-SQFP
• Includes: Change Detection, Power-Up Reset Generation
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -
• Other names: PEF20550HV2.1XT; PEF20550HV21XP; SP000007794; SP000007795

6.1.1
In an ISDN system the digital line card connects subscribers to the PCM highway as well
as to each other. The optimum controlling device for such a line card is the Extended
Line Card Interface Controller (ELIC) PEB 20550. Integrating the PCM interface
controller EPIC, two independent HDLC controllers SACCO-A and SACCO-B, and a D-
channel arbiter onto a single chip, the ELIC offers a high degree of specialisation, while
maintaining wide-ranging flexibility.
Figure 123
Digital PBX
This Application Note demonstrates operation of the ELIC as the key device of the digital
PBX shown in figure 123, by establishing a connection from subscriber A to subscriber
B. In this application the Configurable Interface (CFI) of the EPIC is set to IOM-2 (LC)
protocol, and thus the D-channel arbiter is used to link the SACCO-A to the CFI.
In particular this Application Note will show:
– how to initialize the ELIC CFI and PCM interface
– how to initialize SACCO-A and D-channel Arbiter to handle D-channel data
– how to initialize the SACCO-B to communicate via the PCM highway
– how to initialize the ELIC Control Memory to handle, monitor, control, and B-channels
– how to use the ELIC C/I channel to control the OCTAT-P
– how to use the SACCO-A for D-channel communication with subscribers
– how to switch a telephone connection between subscribers A and B.
As a starting position this Application Note assumes that ELIC and OCTAT-P have been
reset.
6
6.1
Semiconductor Group
Subscriber A
Subscriber B
Subscriber X
Application Notes
Example of ELIC
Introduction
U
U
U
PN
PN
PN
OCTAT -P +
Transceivers
Digital Line Card
®
Operation in a Digital PBX
R
IOM -2 (LC)
R
µP
355
SACCOB
ELIC
R
PCM
Application Notes
Switching
Network
HDLC Group
Controller
PEB 20550
PEF 20550
ITS08103
01.96