SAM7S16 Atmel Corporation, SAM7S16 Datasheet - Page 560

• Manufacturer Part Number: SAM7S16
• Manufacturer: Atmel Corporation

Specifications of SAM7S16

• Flash (kbytes): 16 Kbytes
• Pin Count: 48
• Max. Operating Frequency: 55 MHz
• Cpu: ARM7TDMI
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 21
• Ext Interrupts: 21
• Usb Speed: No
• Usb Interface: No
• Spi: 1
• Twi (i2c): 1
• Uart: 2
• Ssc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 384
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 4
• Self Program Memory: NO
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 3.0 to 3.6
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 3
• Output Compare Channels: 3
• Input Capture Channels: 3
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

560
SAM7S Series
Table 37-7.
Mode
Active, running out of Flash, 50 MHz
(SAM7S64/321/32/161/16)
Active, running out of Flash, 50 MHz
(SAM7S512/256/128)
Active, running out of Flash, 55 MHz
(SAM7S64/321/32/161/16)
Active, running out of Flash, 55 MHz
(SAM7S512/256/128)
Power Consumption for Different Modes
Conditions
Voltage regulator is on.
Brown Out Detector is activated.
Flash is read.
PLL is activated.
ARM Core clock is 50 MHz.
Analog-to-Digital Converter activated.
All peripheral clocks activated.
USB transceiver enabled.
onto AMP1
onto AMP2
Voltage regulator is on.
Brown Out Detector is activated.
Flash is read.
PLL is activated.
ARM Core clock is 50 MHz.
Analog-to-Digital Converter activated.
All peripheral clocks activated.
USB transceiver enabled.
onto AMP1
onto AMP2
Voltage regulator is on.
Brown Out Detector is activated.
Flash is read.
PLL is activated.
ARM Core clock is 55 MHz.
Analog-to-Digital Converter activated.
All peripheral clocks activated.
USB transceiver enabled.
onto AMP1
onto AMP2
Voltage regulator is on.
Brown Out Detector is activated.
Flash is read.
PLL is activated.
ARM Core clock is 55 MHz.
Analog-to-Digital Converter activated.
All peripheral clocks activated.
USB transceiver enabled.
onto AMP1
onto AMP2
Consumption
6175L–ATARM–28-Jul-11
28.3
28.1
30.8
30.6
31.7
31.5
33.3
33.1
Unit
mA
mA
mA
mA