LPC2925 NXP Semiconductors, LPC2925 Datasheet - Page 2

• Manufacturer Part Number: LPC2925
• Description: (LPC2921 - LPC2925) ARM9 microcontroller
• Manufacturer: NXP Semiconductors

NXP Semiconductors
LPC2921_2923_2925_0
Preliminary data sheet
www.DataSheet4U.com
Other peripherals:
Up to 60 general-purpose I/O pins with programmable pull-up, pull-down, or bus
keeper.
Vectored Interrupt Controller (VIC) with 16 priority levels.
Up to 16 level-sensitive external interrupt pins, including USB, CAN and LIN wake-up
features.
Configurable clock-out pin for driving external system clocks.
Processor wake-up from power-down via external interrupt pins; CAN or LIN activity.
Flexible Reset Generator Unit (RGU) able to control resets of individual modules.
Flexible Clock-Generation Unit (CGU) able to control clock frequency of individual
modules:
Second, dedicated CGU with its own PLL generates the USB clock and a configurable
clock output.
Highly configurable system Power Management Unit (PMU):
Standard ARM test and debug interface with real-time in-circuit emulator.
Boundary-scan test supported.
ETM/ETB debug functions with 8 kB of dedicated SRAM also accessible for
application code and data storage.
Dual power supply:
100-pin LQFP package.
−40 °C to +85 °C ambient operating temperature range.
Two 10-bit ADCs, 8-channels each, with 3.3 V measurement range provide 8
analog inputs each with conversion times as low as 2.44 μs per channel. Each
channel provides a compare function to minimize interrupts.
Multiple trigger-start option for all ADCs: timer, PWM, other ADC and external
signal input.
Four 32-bit timers each containing four capture-and-compare registers linked to
I/Os.
Four six-channel PWMs (Pulse-Width Modulators) with capture and trap
functionality.
Two dedicated 32-bit timers to schedule and synchronize PWM and ADC.
Quadrature encoder interface that can monitor one external quadrature encoder.
32-bit watchdog with timer change protection, running on safe clock.
On-chip very low-power ring oscillator; fixed frequency of 0.4 MHz; always on to
provide a Safe_Clock source for system monitoring.
On-chip crystal oscillator with a recommended operating range from 10 MHz to
25 MHz. PLL input range 10 MHz to 25 MHz.
On-chip PLL allows CPU operation up to a maximum CPU rate of 125 MHz.
Generation of up to 11 base clocks.
Seven fractional dividers.
clock control of individual modules.
allows minimization of system operating power consumption in any configuration.
CPU operating voltage: 1.8 V ± 5 %.
I/O operating voltage: 2.7 V to 3.6 V; inputs tolerant up to 5.5 V.
Rev. 00.01 — 24 October 2008
ARM9 microcontroller with CAN and LIN
LPC2921/2923/2925
© NXP B.V. 2008. All rights reserved.
2 of 81