tmp86fp24 TOSHIBA Semiconductor CORPORATION, tmp86fp24 Datasheet - Page 113

• Manufacturer Part Number: tmp86fp24
• Description: 8 Bit Microcontroller
• Manufacturer: TOSHIBA Semiconductor CORPORATION

2.12.2 Register Configuration
(1) AD converter control register 1 (ADCCR1)
(2) AD converter control register 2 (ADCCR2)
(3) AD conversion result register (ADCDR1)
(4) AD conversion result register (ADCDR2)
The AD converter consists of the following four registers:
repeat) in which to perform AD conversion and controls the AD converter as it starts
operating.
converter (Ladder resistor network).
the AD converter.
the AD converter, and then this register is also used to monitor the operating status of
the AD converter.
Figure 2.12.3.
x
x
x
This register selects the analog channels and operation mode (Software start or
This register selects the AD conversion time and controls the connection of the DA
This register is used to store the digital value (Bit9 to bit2) after being converted by
This register is used to store the digital value (Bit1 and bit0) after being converted by
The AD converter control register configurations are shown in Figure 2.12.2 and
AD converter control register 1 (ADCCR1)
AD converter control register 2 (ADCCR2)
AD conversion result register 1/2 (ADCDR1/ADCDR2)
86FP24-111
TMP86FP24
2007-08-24