tmp86fp24 TOSHIBA Semiconductor CORPORATION, tmp86fp24 Datasheet - Page 8

• Manufacturer Part Number: tmp86fp24
• Description: 8 Bit Microcontroller
• Manufacturer: TOSHIBA Semiconductor CORPORATION

Pin Functions (1/2)
P07 (
P06 (TXD, SO1)
P05 (RXD, SI1)
P04
P03 (TC2)
P02 (INT2)
P01 (INT1)
P00 (
P15 (TC1)
P14 (TC3, INT3)
P13
(
P12 (
P11 (SI2)
P10 (SO2)
P23
P22 (XTOUT)
P21 (XTIN)
P20 (
P37 to P30
P47 (SEG16) to
P40 (SEG23, STOP4)
P53
P52
P51 (
P50 (
PWM5
INT0
INT5
SCK1
SCK2
DVO
PPG
Pin Name
,
PDO5
)
)
,
)
P41 (SEG22)
)
)
STOP
, TC5)
)
Input/Output
I/O (Output)
I/O (Output)
I/O (Output)
I/O (Output)
I/O (Output)
I/O (Output)
I/O (Input)
I/O (Input)
I/O (Input)
I/O (Input)
I/O (Input)
I/O (Input)
I/O (Input)
I/O (Input)
I/O (Input)
I/O (Input)
I/O (I/O)
I/O (I/O)
I/O (I/O)
I/O (I/O)
I/O
I/O
I/O
I/O
I/O
8-bit input/output port with latch.
When used as a serial interface output
or UART output, respective output latch
(P0DR) should be set to “1”.
When used as an input port, an serial
interface input, UART input, timer
counter input or an external interrupt
input, respective output control
(P0OUTCR) should be cleared to “0”
after setting P0DR to “1”.
6-bit input/output port with latch.
When used as a timer/counter output or
serial interface output, respective
output latch (P1DR) should be set to
“1”. When used as an input port, a timer
counter input, an external interrupt input
or serial interface input, respective
output control (P1OUTCR) should be
cleared to “0” after setting P1DR to “1”.
4-bit input/output port with latch.
When used as an input port or an
external interrupt input, respective
output control (P2OUTCR) should be
cleared to “0” after setting output latch
(P2DR) to “1”.
8-bit input/output port with latch (N-ch
high current output). When used as an
input port, respective output control
(P3OUTCR) should be cleared to “0”
after setting output latch (P3DR) to “1”.
7-bit input/output port with latch.
When used as an input port, respective
output latch (P4DR) should be set to “1”
after LCD output control (P4LCR) is
cleared to “0”.
1-bit input/output port with latch.
When used as an input port, the output
latch (P4DR) should be set to “1” after
the LCD output control (P4LCR) is
cleared to “0”. When used as a LCD
output, the P4LCR should be set to “1”
after the STOPCR<STOP4EN> should
be cleared to “0”.
When used as a key-on wakeup input,
the STOPCR<STOP4EN> should be
set to “1”.
4-bit input/output port with latch (N-ch
high current output). When used as an
input port, respective output control
(P5OUTCR) should be cleared to “0”
after setting output latch (P5DR) to “1”.
When used as a PPG output or divider
output, respective P5DR should be set
to “1”.
86FP24-6
Functions
Serial clock input/output 1
UART data output, serial data output 1
UART data input, serial data input 1
Timer counter 2 input
External interrupt 2 input
External interrupt 1 input
External interrupt 0 input
Timer counter 1 input
Timer counter 3 input,
External interrupt 3 input
PWM5 output, PDO5 output,
Timer/counter 5 input
Serial clock input/output 2
Serial data input 2
Serial data output 2
Resonator connecting pins (32.768 kHz)
For inputting external clock, XTIN is used and
XTOUT is opened.
External interrupt input 5 or STOP mode
release signal input
LCD segment output
LCD segment output
STOP mode release input
Divider output
PPG output
TMP86FP24
2007-08-24