tmp89fm42 TOSHIBA Semiconductor CORPORATION, tmp89fm42 Datasheet - Page 16

• Manufacturer Part Number: tmp89fm42
• Description: 8 Bit Microcontroller
• Manufacturer: TOSHIBA Semiconductor CORPORATION

1.1 Features
RA000
10. 8-bit timer counter: 4 ch
11. Real time clock
12. UART : 1ch
13. UART/SIO : 1ch Note : One SIO channel can be used at the same time.
14. I
15. Key-on wake-up : 8 ch
16. 10-bit successive approximation type AD converter
17. On-chip debug function
18. Clock operation mode control circuit : 2 circuit
19. Low power consumption operation (8 mode)
20. Wide operation voltage:
2
C/SIO : 1ch
- Timer, Event Counter, PWM, PPG OUTPUT modes
- Usable as a 16-bit timer, 12-bit PWM output and 16-bit PPG output by the cascade connection of two
- Analog input : 8ch
- Break/Event
- Trace
- RAM monitor
- Flash memory writing
- STOP mode:
- SLOW1 mode:
- SLOW2 mode:
- IDLE0 mode:
- IDLE1 mode:
- IDLE2 mode:
- SLEEP0 mode:
- SLEEP1 mode:
Single clock mode / Dual clock mode
channels.
Oscillation stops. (Battery/Capacitor back-up.)
Low power consumption operation using low-frequency clock.(High-frequency clock stop.)
Low power consumption operation using low-frequency clock.(High-frequency clock oscillate.)
CPU stops, and only the Time-Based-Timer(TBT) on peripherals operate using high frequency clock.
Released when the reference time set to TBT has elapsed.
The CPU stops, and peripherals operate using high frequency clock. Release by interruputs(CPU
restarts).
CPU stops and peripherals operate using high and low frequency clock. Release by interruputs. (CPU
restarts).
CPU stops, and only the Time-Based-Timer(TBT) on peripherals operate using low frequency clock.
Released when the reference time set to TBT has elapsed.
CPU stops, and peripherals operate using low frequency clock. Release by interruput.(CPU restarts).
4.3 V to 5.5 V at 10MHz /32.768 kHz
2.7 V to 5.5 V at 4.2 MHz /32.768 kHz
2.2 V to 5.5 V at 2MHz /32.768 kHz
Page 2
TMP89FM42