LPC47M172_07 SMSC [SMSC Corporation], LPC47M172_07 Datasheet - Page 87

• Manufacturer Part Number: LPC47M172_07
• Description: Advanced I/O Controller with Motherboard GLUE Logic
• Manufacturer: SMSC [SMSC Corporation]

Note 1
Note 2
Note 3
Note 4
Note 5
Note 6
Note 7
Note 8
SMSC LPC47M172
DLAB is Bit 7 of the Line Control Register (ADDR = 3).
Bit 0 is the least significant bit. It is the first bit serially transmitted or received.
When operating in the XT mode, this bit will be set any time that the transmitter shift register is empty.
This bit no longer has a pin associated with it.
When operating in the XT mode, this register is not available.
These bits are always zero in the non-FIFO mode.
Writing a one to this bit has no effect. DMA modes are not supported in this chip.
The UART1 and UART2 FCR’s are shadowed in the UART1 FIFO Control Shadow Register (runtime
register at offset 0x20) and UART2 FIFO Control Shadow Register (runtime register at offset 0x21).
DATASHEET
Page 87
Advanced I/O Controller with Motherboard GLUE Logic
SMSC/Non-SMSC Register Sets (Rev. 01-11-07)
Datasheet