LPC1769FBD100,551 NXP Semiconductors, LPC1769FBD100,551 Datasheet - Page 113

• Manufacturer Part Number: LPC1769FBD100,551
• Description: IC ARM CORTEX MCU 512K 100-LQFP
• Manufacturer: NXP Semiconductors
• Series: LPC17xxr

Specifications of LPC1769FBD100,551

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 100-LQFP
• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 120MHz
• Connectivity: CAN, Ethernet, I²C, IrDA, Microwire, SPI, SSI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 70
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 3.6 V
• Data Converters: A/D 8x12b, D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC17
• Core: ARM Cortex M3
• Data Bus Width: 32 bit
• Data Ram Size: 64 KB
• Interface Type: Ethernet, USB, OTG, CAN
• Maximum Clock Frequency: 120 MHz
• Number Of Programmable I/os: 70
• Number Of Timers: 4
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, MCB1760, MCB1760U, MCB1760UME
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 8 Channel
• On-chip Dac: 10 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4966; 935290522551

NXP Semiconductors
UM10360
User manual
8.5.12 Pin Mode select register 3 (PINMODE3 - 0x4002 C04C)
8.5.11 Pin Mode select register 2 (PINMODE2 - 0x4002 C048)
Table 88.
[1]
[2]
This register controls pull-up/pull-down resistor configuration for Port 1 pins 0 to 15. For
details see
Table 89.
This register controls pull-up/pull-down resistor configuration for Port 1 pins 16 to 31. For
details see
Table 90.
PINMODE1 Symbol
21:20
29:22
31:30
PINMODE2 Symbol
1:0
3:2
7:4
9:8
15:10
17:16
19:18
21:20
27:22
29:28
31:30
PINMODE3 Symbol
1:0
3:2
5:4
7:6
9:8
11:10
13:12
Not available on 80-pin package.
The pin mode cannot be selected for pins P0[27] to P0[30]. Pins P0[27] and P0[28] are dedicated I2C
open-drain pins without pull-up/down. Pins P0[29] and P0[30] are USB specific pins without configurable
pull-up or pull-down resistors. Pins P0[29] and P0[30] also must have the same direction since they operate
as a unit for the USB function, see
FIO4DIR- 0x2009 C000 to 0x2009
Pin Mode select register 1 (PINMODE1 - address 0x4002 C044) bit description
Pin Mode select register 2 (PINMODE2 - address 0x4002 C048) bit description
Pin Mode select register 3 (PINMODE3 - address 0x4002 C04C) bit description
Section 8.4 “Pin mode select register
Section 8.4 “Pin mode select register
P0.26MODE
-
-
P1.00MODE
P1.01MODE
-
P1.04MODE
-
P1.08MODE
P1.09MODE
P1.10MODE
-
P1.14MODE
P1.15MODE
P1.16MODE
P1.17MODE
P1.18MODE
P1.19MODE
P1.20MODE
P1.21MODE
P1.22MODE
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 19 August 2010
[1]
[1]
[1]
Description
Port 1 pin 26 control, see P0.00MODE.
Reserved.
Reserved.
Description
Port 1 pin 0 control, see P0.00MODE.
Port 1 pin 1 control, see P0.00MODE.
Reserved.
Port 1 pin 4 control, see P0.00MODE.
Reserved.
Port 1 pin 8 control, see P0.00MODE.
Port 1 pin 9 control, see P0.00MODE.
Port 1 pin 10 control, see P0.00MODE.
Reserved.
Port 1 pin 14 control, see P0.00MODE.
Port 1 pin 15 control, see P0.00MODE.
Description
Port 1 pin 16 control, see P0.00MODE.
Port 1 pin 17 control, see P0.00MODE.
Port 1 pin 18 control, see P0.00MODE.
Port 1 pin 19 control, see P0.00MODE.
Port 1 pin 20 control, see P0.00MODE.
Port 1 pin 21 control, see P0.00MODE.
Port 1 pin 22 control, see P0.00MODE.
Section 9.5.1 “GPIO port Direction register FIOxDIR (FIO0DIR to
C080)”.
[2]
Chapter 8: LPC17xx Pin connect block
values”.
values”.
UM10360
© NXP B.V. 2010. All rights reserved.
113 of 840
Reset
value
00
NA
NA
Reset
value
00
00
NA
00
NA
00
00
00
NA
00
00
Reset
value
00
00
00
00
00
00
00