MC68HC908RF2MFA Freescale Semiconductor, MC68HC908RF2MFA Datasheet - Page 56

• Manufacturer Part Number: MC68HC908RF2MFA
• Description: IC MCU 2K FLASH 4MHZ 32-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC68HC908RF2MFA

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 4MHz
• Peripherals: LVD, POR, PWM, RF Mod
• Number Of I /o: 12
• Program Memory Size: 2KB (2K x 8)
• Program Memory Type: FLASH
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 32-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Data Converters: -
• Connectivity: -

Central Processor Unit (CPU)
5.4 Arithmetic/Logic Unit (ALU)
5.5 Low-Power Modes
5.5.1 Wait Mode
5.5.2 Stop Mode
5.6 CPU During Break Interrupts
Data Sheet
56
The ALU performs the arithmetic and logic operations defined by the instruction
set.
Refer to the CPU08 Reference Manual (Motorola document order number
CPU08RM/AD) for a description of the instructions and addressing modes and
more detail about the architecture of the CPU.
The WAIT and STOP instructions put the MCU in low power-consumption standby
modes.
The WAIT instruction:
The STOP instruction:
After exiting stop mode, the CPU clock begins running after the oscillator
stabilization delay.
If a break module is present on the MCU, the CPU starts a break interrupt by:
The break interrupt begins after completion of the CPU instruction in progress. If
the break address register match occurs on the last cycle of a CPU instruction, the
break interrupt begins immediately.
A return-from-interrupt instruction (RTI) in the break routine ends the break
interrupt and returns the MCU to normal operation if the break interrupt has been
deasserted.
•
•
•
•
•
•
Clears the interrupt mask (I bit) in the condition code register, enabling
interrupts. After exit from wait mode by interrupt, the I bit remains clear. After
exit by reset, the I bit is set.
Disables the CPU clock
Clears the interrupt mask (I bit) in the condition code register, enabling
external interrupts. After exit from stop mode by external interrupt, the I bit
remains clear. After exit by reset, the I bit is set.
Disables the CPU clock
Loading the instruction register with the SWI instruction
Loading the program counter with $FFFC:$FFFD or with $FEFC:$FEFD in
monitor mode
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
Central Processor Unit (CPU)
MC68HC908RF2 — Rev. 4.0
MOTOROLA