MC68HC705C8ACFNE Freescale Semiconductor, MC68HC705C8ACFNE Datasheet - Page 135

• Manufacturer Part Number: MC68HC705C8ACFNE
• Description: IC MCU 8K 2.1MHZ OTP 44-PLCC
• Manufacturer: Freescale Semiconductor
• Series: HC05r

Specifications of MC68HC705C8ACFNE

• Core Processor: HC05
• Core Size: 8-Bit
• Speed: 2.1MHz
• Connectivity: SCI, SPI
• Peripherals: POR, WDT
• Number Of I /o: 24
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: OTP
• Ram Size: 304 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-PLCC
• A/d Inputs: 4-Channel, 8-Bit
• Eeprom Memory: 0 Bytes
• Input Output: 24
• Interface: SCI/SPI
• Memory Type: OTP
• Number Of Bits: 8
• Package Type: 44-pin PLCC
• Programmable Memory: 8K Bytes
• Timers: 3-16-bit
• Voltage, Range: 3-5.5 V
• Processor Series: HC705C
• Core: HC05
• Data Bus Width: 8 bit
• Data Ram Size: 304 B
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 2.1 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 1
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: RoHS Compliant part

MC68HC705C8A — Rev. 3
MOTOROLA
OR — Receiver Overrun Bit
NF — Receiver Noise Flag Bit
FE — Receiver Framing Error Bit
This clearable, read-only bit is set if the SCDR is not read before the
receive shift register receives the next word. OR generates an
interrupt request if the RIE bit in SCCR2 is also set. The data in the
shift register is lost, but the data already in the SCDR is not affected.
Clear the OR bit by reading the SCSR with OR set and then reading
the SCDR. Reset clears the OR bit.
This clearable, read-only bit is set when noise is detected in data
received in the SCI data register. Clear the NF bit by reading the
SCSR and then reading the SCDR. Reset clears the NF bit.
This clearable, read-only flag is set when a logic 0 is located where a
stop bit should be in the character shifted into the receive shift
register. If the received word causes both a framing error and an
overrun error, the OR bit is set and the FE bit is not set. Clear the FE
bit by reading the SCSR and then reading the SCDR. Reset clears the
FE bit.
Freescale Semiconductor, Inc.
For More Information On This Product,
1 = Receiver shift register full and RDRF = 1
0 = No receiver overrun
1 = Noise detected in SCDR
0 = No noise detected in SCDR
1 = Framing error
0 = No framing error
Serial Communications Interface (SCI)
Go to: www.freescale.com
Serial Communications Interface (SCI)
SCI I/O Registers
Technical Data