R88A-CSU015C Omron, R88A-CSU015C Datasheet - Page 134

• Manufacturer Part Number: R88A-CSU015C
• Description: ABSOLUTE ENCODER CABLE,15M
• Manufacturer: Omron

Specifications of R88A-CSU015C

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Operation
Note 1. This parameter is only valid for the FND-X50H- .
Note 2. After this parameter has been set, it will become valid when the power supply is turned OFF
j H Parameters
3-22
UP-31
HP-33
HP-46
When attaching an External Regeneration Resistor, this parameter specifies its capacity (kW).
This parameter is used for calculating the regeneration absorption rate. (The regeneration absorption
rate is displayed in Monitor Mode.)
This parameter specifies the time interval for the effective load factor calculation.
Set the integer multiple for the
The effective load factor is displayed in Monitor Mode.
This parameter specifies the minimum ON time for the positioning completed signal and the minimum
OFF time for the ready signal.
Be sure to set enough time so that the Programmable Controller (PC) will be able to respond when the
positioning completed signal and the ready signal are received by the PC.
When the Increment and Decrement Keys are pressed, the set value is changed in units of 3.2 ms. The
digit to be set cannot be specified by pressing the Shift Key.
PRM No.
PRM No.
PRM No.
Set value
(check that the display has been cleared) and ON again.
External regeneration
resistance capacity
Load rate time
In-position timer
PC cycle time
Parameter name
Parameter name
Parameter name
machine cycle time.
2 + PC input delay time + 1 ms
0.00 TO
327.67
1 to 60
3.2 to 320.0
Setting range
Setting range
Setting range
kW
s
ms
Unit
Unit
Unit
0.00
30
3.2
Factory setting
Factory setting
Factory setting
Chapter 3