R88A-CSU015C Omron, R88A-CSU015C Datasheet - Page 213

• Manufacturer Part Number: R88A-CSU015C
• Description: ABSOLUTE ENCODER CABLE,15M
• Manufacturer: Omron

Specifications of R88A-CSU015C

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Application
4-5
4-5-1 Preliminary Inspection
j Power Supply Voltage Check
j Monitoring Device Selection
Position Driver Display Panel
Teaching Box
4-22
Check that the voltage at the AC power supply terminals is within the following range:
If the voltage is outside this range, faulty operation may occur. Provide the correct power supply.
Check that the power supply voltages for external device interfaces are within the following range:
If the voltage is outside this range, faulty operation may occur. Provide the correct power supply.
Alarm Check
Monitoring Device Type
If an alarm has been generated, check the alarm code and take countermeasures in accordance
with the meaning of that code.
If an alarm has not been generated, take countermeasures in accordance with the nature of the
error. (Refer to 4-5-4 Troubleshooting .)
The following types of monitoring device are available.
Investigate the error using the 7-segment LED display panel on the front side of the Position Driver
along with the operating keys. (When an alarm has been generated, it will automatically be dis-
played.) The investigation procedure for this device type is explained in this manual.
Use the following three items together. (When an alarm has been generated, it will automatically be
displayed.)
CVM1-PRO01
CVM1-MP702
CVM1-MP703
CV500-CN 2A
(The
used.)
This section describes the preliminary inspections and monitoring devices that are
required to locate and clear the cause of an error.
Troubleshooting
100-VAC-input type
200-VAC-input type
23 to 25 VDC
in the model name represents the length of the cable. Any of the lengths 2, 4, or 6 m can be
Programming Console without ROM.
Memory Cassette compatible with FND-X and MC/NC Units, or
FND-X-dedicated Memory Cassette.
Connecting Cable to connect the Position Driver and the Teaching Box.
85 to 127 VAC
170 to 264 VAC
Chapter 4