R88A-CSU015C Omron, R88A-CSU015C Datasheet - Page 224

• Manufacturer Part Number: R88A-CSU015C
• Description: ABSOLUTE ENCODER CABLE,15M
• Manufacturer: Omron

Specifications of R88A-CSU015C

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Specifications
5-1
5-1-1 General Specifications (Common to DIO, CompoBus/S)
Note 1. The above items reflect individual evaluation testing. The results may differ under com-
Note 2. Absolutely do not conduct a withstand voltage test or a megger test on the Position Driver. If
Note 3. Depending on the operating conditions, some Position Driver parts will require maintenance.
Note 4. The service life of the Position Driver is 50,000 hours at an average ambient temperature of
5-2
Power supply voltage
Ambient operating temperature
Ambient operating humidity
Ambient storage temperature
Ambient storage humidity
Storage and operating atmo-
sphere
Dielectric strength
Insulation resistance
Vibration resistance
Impact resistance
Protective structure
Low-voltage Directives applica-
ble class
Position Driver Specifications
pounded conditions.
such tests are conducted, internal elements may be damaged.
Refer to 4-6 Periodic Maintenance for details.
35 C (at the rated torque and the rated rotation speed).
Item
Single-phase 200-VAC (FND-X06H/-X12H/-X25H- ):
Three-phase 200-VAC (FND-X50H- ):
Single-phase 100-VAC (FND-X06L/-X12L- ):
0 to 55 C
35% to 90% RH (with no condensation)
–10 to 70 C
35% to 90% RH (with no condensation)
No corrosive gasses.
1,500 VAC
Between supply input terminals and case: 5 M min. (at 500 VDC)
10 to 150 Hz in X, Y, and Z directions with 0.10-mm double amplitude;
acceleration: 9.8 m/s
Acceleration 98 m/s
each.
Built into panel (IP00).
Overvoltage category II
Pollution degree II
Single-phase 200/240 VAC, –15% to +10%, at 50/60 Hz
Three-phase 200/240 VAC, –15% to +10%, at 50/60 Hz
Single-phase 100/115 VAC, –15% to +10%, at 50/60 Hz
RMS
for 1 min at 50/60 Hz
2
2
{10 G} max., in X, Y, and Z directions, three times
{1 G} max.; time coefficient: 8 min; 4 sweeps
Specifications
Chapter 5