EP1S10F484I6 Altera, EP1S10F484I6 Datasheet - Page 456

• Manufacturer Part Number: EP1S10F484I6
• Description: IC STRATIX FPGA 10K LE 484-FBGA
• Manufacturer: Altera
• Series: Stratix®r

Specifications of EP1S10F484I6

• Number Of Logic Elements/cells: 10570
• Number Of Labs/clbs: 1057
• Total Ram Bits: 920448
• Number Of I /o: 335
• Voltage - Supply: 1.425 V ~ 1.575 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 484-FBGA
• Family Name: Stratix
• Number Of Logic Blocks/elements: 10570
• # I/os (max): 335
• Frequency (max): 450.05MHz
• Process Technology: 0.13um (CMOS)
• Operating Supply Voltage (typ): 1.5V
• Logic Cells: 10570
• Ram Bits: 920448
• Operating Supply Voltage (min): 1.425V
• Operating Supply Voltage (max): 1.575V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 484
• Package Type: FC-FBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Not Compliant

I/O Termination
I/O Termination
4–28
Stratix Device Handbook, Volume 2
You can power up or power down the V
sequence. The power supply ramp rates can range from 100 ns to 100 ms.
During hot socketing, the I/O pin capacitance is less than 15 pF and the
clock pin capacitance is less than 20 pF.
DC Hot Socketing Specification
The hot socketing DC specification is | I
AC Hot Socketing Specification
The hot socketing AC specification is | I
This specification takes into account the pin capacitance, but not board
trace and external loading capacitance. Additional capacitance for trace,
connector, and loading must be considered separately.
I
specification applies when all VCC supplies to the device are stable in the
powered-up or powered-down conditions. For the AC specification, the
peak current duration because of power-up transients is 10 ns or less. For
more information, refer to the Hot-Socketing & Power-Sequencing Feature &
Testing for Altera Devices white paper.
Although single-ended, non-voltage-referenced I/O standards do not
require termination, Altera recommends using external termination to
improve signal integrity where required.
The following I/O standards do not require termination:
■
■
■
■
■
■
■
■
Voltage-Referenced I/O Standards
Voltage-referenced I/O standards require both an input reference
voltage, V
board should be used for series and parallel termination.
IOPIN
LVTTL
LVCMOS
2.5 V
1.8 V
1.5 V
3.3-V PCI/Compact PCI
3.3-V PCI-X 1.0
3.3-V AGP 1
is the current at any user I/O pin on the device. The DC
REF,
and a termination voltage, V
CCIO
IOPIN
IOPIN
TT
. Off-chip termination on the
and V
| < 300 A.
| < 8 mA for 10 ns or less.
CCINT
Altera Corporation
pins in any
June 2006