MC7448VU1700LD Freescale Semiconductor, MC7448VU1700LD Datasheet - Page 13

• Manufacturer Part Number: MC7448VU1700LD
• Description: IC MPU RISC 32BIT 360-FCCBGA
• Manufacturer: Freescale Semiconductor

Specifications of MC7448VU1700LD

• Processor Type: MPC74xx PowerPC 32-Bit
• Speed: 1.7GHz
• Voltage: 1.3V
• Mounting Type: Surface Mount
• Package / Case: 360-FCCBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -

Table 7
Section 11.1, “Part Numbers Fully Addressed by This Document,”
numbers are described by this document. Freescale also offers MPC7448 part numbers that meet lower
power consumption specifications by adhering to lower core voltage and core frequency specifications.
For more information on these devices, including references to the MPC7448 Hardware Specification
Addenda that describe these devices, see
Document.”
The power consumptions provided in
operated at the rated maximum core frequency (see
by core frequency, and power limits for each speed grade are independent of each other. Each device is
tested at its maximum core frequency only. (Note that Deep Sleep Mode power consumption is
independent of clock frequency.) Operating a device at a frequency lower than its rated maximum is fully
supported provided the clock frequencies are within the specifications given in
operated below its rated maximum will have lower power consumption. However, inferences should not
be made about a device’s power consumption based on the power specifications of another (lower) speed
grade. For example, a 1700 MHz device operated at 1420 MHz may not exhibit the same power
consumption as a 1420 MHz device operated at 1420 MHz.
For all MPC7448 devices, the following guidelines on the use of these parameters for system design are
suggested. The Full-Power Mode–Typical value represents the sustained power consumption of the device
Freescale Semiconductor
At recommended operating conditions. See
High-impedance (off-state) leakage current:
V
V
Output high voltage @ I
Output low voltage @ I
Capacitance,
V
Notes:
1. Nominal voltages; see
2. All I/O signals are referenced to OV
3. Excludes test signals and IEEE Std. 1149.1 boundary scan (JTAG) signals
4. The leakage is measured for nominal OV
5. Capacitance is periodically sampled rather than 100% tested.
6. These pins have internal pull-up resistors.
in
in
in
example, both OV
= OV
= GND
= 0 V, f = 1 MHz
provides the power consumption for the MPC7448 part numbers described by this document; see
DD
Characteristic
DD
OL
OH
and V
All inputs
Table 4
= 5 mA
MPC7448 RISC Microprocessor Hardware Specifications, Rev. 4
= –5 mA
DD
Table 6. DC Electrical Specifications (continued)
vary by either +5% or –5%).
for recommended operating conditions.
Table
DD
.
4.
Table 7
DD
and V
Section 11.2, “Part Numbers Not Fully Addressed by This
Nominal Bus
Voltage
represent the power consumption of each speed grade when
DD
1.5
1.8
2.5
1.5
1.8
2.5
—
, or both OV
1
Table
Symbol
V
V
8). Freescale sorts devices by power as well as
I
DD
C
TSI
OH
OL
in
and V
OV
OV
DD
for information regarding which part
DD
DD
must vary in the same direction (for
Min
1.8
—
—
—
—
—
– 0.45
– 0.45
Electrical and Thermal Characteristics
Table
Max
– 50
0.45
0.45
0.6
8.0
—
—
—
50
8, and a device
Unit
µA
pF
V
V
Notes
2, 3, 4
5
13