MC7448VU1700LD Freescale Semiconductor, MC7448VU1700LD Datasheet - Page 14

• Manufacturer Part Number: MC7448VU1700LD
• Description: IC MPU RISC 32BIT 360-FCCBGA
• Manufacturer: Freescale Semiconductor

Specifications of MC7448VU1700LD

• Processor Type: MPC74xx PowerPC 32-Bit
• Speed: 1.7GHz
• Voltage: 1.3V
• Mounting Type: Surface Mount
• Package / Case: 360-FCCBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -

Electrical and Thermal Characteristics
when running a typical benchmark at temperatures in a typical system. The Full-Power Mode–Thermal
value is intended to represent the sustained power consumption of the device when running a typical code
sequence at high temperature and is recommended to be used as the basis for designing a thermal solution;
see
solutions. The Full-Power Mode–Maximum value is recommended to be used for power supply design
because this represents the maximum peak power draw of the device that a power supply must be capable
of sourcing without voltage droop. For information on power consumption when dynamic frequency
switching is enabled, see
14
Typical
Thermal
Maximum
Typical
Typical
Typical
Notes:
1. These values specify the power consumption for the core power supply (V
2. Typical power consumption is an average value measured with the processor operating at its rated maximum processor
3. Maximum power consumption is the average measured with the processor operating at its rated maximum processor core
4. Doze mode is not a user-definable state; it is an intermediate state between full-power and either nap or sleep mode. As
5. Thermal power consumption is an average value measured at the nominal recommended V
6. Typical power consumption for these modes is measured at the nominal recommended V
Section 9.7, “Power and Thermal Management
processor bus frequencies and configurations. The values do not include I/O supply power (OV
(AV
AV
more information on these devices, see
core frequency (except for Deep Sleep Mode), at nominal recommended V
Dhrystone 2.1 benchmark and achieving 2.3 Dhrystone MIPs/MHz. This parameter is not 100% tested but periodically
sampled.b
frequency, at nominal V
cache-resident, contrived sequence of instructions to keep all the execution units maximally busy.
a result, power consumption for this mode is not tested.
while running the Dhrystone 2.1 benchmark and achieving 2.3 Dhrystone MIPs/MHz. This parameter is not 100% tested
but periodically sampled.
the mode described. This parameter is not 100% tested but is periodically sampled.
DD
DD
< 13 mW. Freescale also offers MPC7448 part numbers that meet lower power consumption specifications; for
). OV
DD
Die Junction
Temperature
power is system dependent but is typically < 5% of V
Table 7. Power Consumption for MPC7448 at Maximum Rated Frequency
105 •C C
105 •C C
105 •C C
105 •C C
105 •C C
65 •C C
(T
j
)
DD
MPC7448 RISC Microprocessor Hardware Specifications, Rev. 4
Section 9.7.5, “Dynamic Frequency Switching (DFS).”
and maximum operating junction temperature (see
1000 MHz
Maximum Processor Core Frequency (Speed Grade, MHz)
15.0
18.6
21.6
11.1
10.8
10.4
Section 11.2, “Part Numbers Not Fully Addressed by This
Deep Sleep Mode (PLL Disabled)
1420 MHz
Full-Power Mode
19.0
23.3
27.1
11.8
Sleep Mode
11.4
11.0
Nap Mode
Information” for more information on thermal
1600 MHz
DD
20.0
24.4
28.4
13.0
12.5
12.0
power. Worst case power consumption for
DD
DD
) at nominal voltage and apply to all valid
(see
Table
Table
4) while running an entirely
1700 MHz
21.0
25.6
29.8
13.0
12.5
12.0
DD
4) and 65°C while running the
DD
(see
(see
DD
Freescale Semiconductor
Table
) or PLL supply power
Document.”
Table
Unit
W
W
W
W
W
W
4) and 105 °C in
4) and 105 °C
Notes
1, 2
1, 5
1, 3
1, 6
1, 6
1, 6