S9S12G64F0MLF Freescale Semiconductor, S9S12G64F0MLF Datasheet - Page 312

• Manufacturer Part Number: S9S12G64F0MLF
• Description: 16-bit Microcontrollers - MCU S12 Core,64kFlash,Au
• Manufacturer: Freescale Semiconductor

Specifications of S9S12G64F0MLF

• Rohs: yes
• Core: S12
• Processor Series: MC9S12G
• Data Bus Width: 16 bit
• Maximum Clock Frequency: 25 MHz
• Program Memory Size: 64 KB
• Data Ram Size: 2 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 3.13 V to 5.5 V
• Operating Temperature Range: - 40 C to + 125 C
• Package / Case: LQFP-48
• Mounting Style: SMD/SMT

S12S Debug Module (S12SDBGV2)
Tag: Tags can be attached to CPU opcodes as they enter the instruction pipe. If the tagged opcode reaches
the execution stage a tag hit occurs.
8.1.2
The comparators monitor the bus activity of the CPU module. A match can initiate a state sequencer
transition. On a transition to the Final State, bus tracing is triggered and/or a breakpoint can be generated.
Independent of comparator matches a transition to Final State with associated tracing and breakpoint can
be triggered immediately by writing to the TRIG control bit.
The trace buffer is visible through a 2-byte window in the register address map and can be read out using
standard 16-bit word reads. Tracing is disabled when the MCU system is secured.
8.1.3
314
•
•
•
•
•
•
Three comparators (A, B and C)
— Comparators A compares the full address bus and full 16-bit data bus
— Comparator A features a data bus mask register
— Comparators B and C compare the full address bus only
— Each comparator features selection of read or write access cycles
— Comparator B allows selection of byte or word access cycles
— Comparator matches can initiate state sequencer transitions
Three comparator modes
— Simple address/data comparator match mode
— Inside address range mode, Addmin ≤ Address ≤ Addmax
— Outside address range match mode, Address < Addmin or Address > Addmax
Two types of matches
— Tagged — This matches just before a specific instruction begins execution
— Force — This is valid on the first instruction boundary after a match occurs
Two types of breakpoints
— CPU breakpoint entering BDM on breakpoint (BDM)
— CPU breakpoint executing SWI on breakpoint (SWI)
Trigger mode independent of comparators
— TRIG Immediate software trigger
Four trace modes
— Normal: change of flow (COF) PC information is stored (see
— Loop1: same as Normal but inhibits consecutive duplicate source address entries
— Detail: address and data for all cycles except free cycles and opcode fetches are stored
— Compressed Pure PC: all program counter addresses are stored
for change of flow definition.
Overview
Features
MC9S12G Family Reference Manual, Rev.1.23
Section 8.4.5.2.1, “Normal
Freescale Semiconductor
Mode)