MC9S08DV32ACLF Freescale Semiconductor, MC9S08DV32ACLF Datasheet - Page 59

• Manufacturer Part Number: MC9S08DV32ACLF
• Description: IC MCU 32K FLASH 2K RAM 48-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS08r

Specifications of MC9S08DV32ACLF

• Core Processor: HCS08
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: CAN, I²C, LIN, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 39
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-LQFP
• Processor Series: S08DV
• Core: HCS08
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: CAN, I2C, SCI, SPI
• Number Of Programmable I/os: 26
• Operating Supply Voltage: 5.5 V
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWS08
• Development Tools By Supplier: DEMO9S08DZ60
• On-chip Adc: 12 bit, 10 channel
• Controller Family/series: HCS08
• No. Of I/o's: 39
• Ram Memory Size: 2KB
• Cpu Speed: 40MHz
• No. Of Timers: 2
• Digital Ic Case Style: LQFP
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

4.5.7
The block protection feature prevents the protected region of Flash from program or erase changes. Block
protection is controlled through the Flash protection register (FPROT). The FPS bits determine the
protected region of Flash. See
After exit from reset, FPROT is loaded with the contents of the NVPROT location, which is in the
nonvolatile register block of the Flash memory. Any FPROT write that attempts to decrease the size of the
protected region will be ignored. Because NVPROT is within the last sector of Flash, if any amount of
memory is protected, NVPROT is itself protected and cannot be unprotected (intentionally or
unintentionally) by the application software. FPROT can be written through background debug
commands, which provides a way to erase and reprogram protected Flash memory.
One use for block protection is to block protect an area of Flash memory for a bootloader program. this
bootloader program can call a routine outside of Flash that can be used to sector erase the rest of the Flash
memory and reprogram it. The bootloader is protected even if MCU power is lost during an erase and
reprogram operation.
4.5.8
While any Flash is block protected, the reset and interrupt vectors will be protected. Vector redirection
allows users to modify interrupt vector information without unprotecting bootloader and reset vector
space. Vector redirection is enabled by programming the FNORED bit in the NVOPT register located at
address 0xFFBF to 0. For redirection to occur, at least some portion of the Flash memory must be block
protected by programming the NVPROT register located at address 0xFFBD. All interrupt vectors
(memory locations 0xFFC0–0xFFFD) are redirected, though the reset vector (0xFFFE:0xFFFF) is not.
For example, if 1536 bytes of Flash are protected, the protected address region is from 0xFA00 through
0xFFFF. The interrupt vectors (0xFFC0–0xFFFD) are redirected to the locations 0xF9C0–0xF9FD. If
vector redirection is enabled and an interrupt occurs, the values in the locations 0xF9E0:0xF9E1 are used
for the vector instead of the values in the locations 0xFFE0:0xFFE1. This allows the user to reprogram the
unprotected portion of the Flash with new program code including new interrupt vector values while
leaving the protected area, which includes the default vector locations, unchanged.
4.5.9
The MC9S08DV60 Series includes circuitry to prevent unauthorized access to the contents of Flash and
RAM memory. When security is engaged, Flash and RAM are considered secure resources. Direct-page
registers, high-page registers, and the background debug controller are considered unsecured resources.
Programs executing within secure memory have normal access to any MCU memory locations and
resources. Attempts to access a secure memory location with a program executing from an unsecured
memory space or through the background debug interface are blocked (writes are ignored and reads return
all 0s).
Security is engaged or disengaged based on the state of two register bits (SEC[1:0]) in the FOPT register.
During reset, the contents of the nonvolatile location NVOPT are copied from Flash into the working
FOPT register in high-page register space. A user engages security by programming the NVOPT location,
which can be performed at the same time the Flash memory is programmed. The 1:0 state disengages
Freescale Semiconductor
Block Protection
Vector Redirection
Security
Section 4.5.10.4, “Flash Protection Register (FPROT and
MC9S08DV60 Series Data Sheet, Rev 3
NVPROT).”
Chapter 4 Memory
59