HD6417727BP100BV Renesas Electronics America, HD6417727BP100BV Datasheet - Page 742

• Manufacturer Part Number: HD6417727BP100BV
• Description: IC SUPERH MPU ROMLESS 240BGA
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417727BP100BV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 100MHz
• Connectivity: FIFO, SCI, SIO, SmartCard, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 104
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.6 V ~ 2.05 V
• Data Converters: A/D 6x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 240-BGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -

Section 22 USB Pin Multiplex Controller
22.3
22.3.1
Figures 22.2 to 22.5 show example connections of USB function controller and transceiver.
Figures 22.2 and 22.3 show connections when using the built-in USB transceiver. Figures 22.4
and 22.5 show connections when not using the built-in USB transceiver. When using the USB
function controller, the signals must be input to the cable connection monitor pin UJBF_VBUS.
The USBF_VBUS pin is multiplexed with the USB1_ovr_current pin, and writing 1 to bit 0 of the
EXPFC register selects the USBF_VBUS pin functions. According to the status of the
USBF_VBUS pin, the USB function controller recognizes whether the cable is
connected/disconnected. Also, pin D+ must be pulled up in order to notify the USB host/hub that
the connection is established. The sample circuits in figures 22.2 to 22.5 use the USB1_pwr_en
pin for pull-up control.
Rev.6.00 Mar. 27, 2009 Page 684 of 1036
REJ09B0254-0600
Figure 22.2 Example 1 of Transceiver Connection for USB function Controller
Examples of External Circuit
Example of the Connection between USB Function Controller and Transceiver
SH7727
USB function
USB1d_SUSPEND
USB1d_TXDPLS
USB1d_SPEED
USB1d_TXSEO
USB1d_TXENL
USB1d_DMNS
USB1_pwr_en
USB1d_DPLS
USBF_VBUS
USB1d_RCV
USB1_M
USB1_P
(On-chip transceiver is used)
3.3V
IC1
IC allowing voltage
application when
system power is off
27Ω
27Ω
IC2
IC allowing voltage
application when
system power is off
1.5kΩ
USB connector
5V
VBUS
D+
D−
GND