ADV7183BBSTZ Analog Devices Inc, ADV7183BBSTZ Datasheet - Page 22

• Manufacturer Part Number: ADV7183BBSTZ
• Description: IC,TV/VIDEO CIRCUIT,Color Decoder Circuit,CMOS,QFP,80PIN,PLASTIC
• Manufacturer: Analog Devices Inc
• Type: Video Decoderr

Specifications of ADV7183BBSTZ

• Applications: Projectors, Recorders, Security
• Voltage - Supply, Analog: 3.15 V ~ 3.45 V
• Voltage - Supply, Digital: 1.65 V ~ 2 V
• Mounting Type: Surface Mount
• Package / Case: 80-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

ADV7183B
AD_SECAM_EN Enable Autodetection of SECAM,
Address 0x07[6]
Setting AD_SECAM_EN to 0 disables the autodetection of
SECAM.
Setting AD_SECAM_EN to 1 (default) enables the detection.
AD_N443_EN Enable Autodetection of NTSC 443,
Address 0x07[5]
Setting AD_N443_EN to 0 disables the autodetection of NTSC
style systems with a 4.43 MHz color subcarrier.
Setting AD_N443_EN to 1 (default) enables the detection.
AD_P60_EN Enable Autodetection of PAL60,
Address 0x07[4]
Setting AD_P60_EN to 0 disables the autodetection of PAL
systems with a 60 Hz field rate.
Setting AD_P60_EN to 1 (default) enables the detection.
AD_PALN_EN Enable Autodetection of PAL N,
Address 0x07[3]
Setting AD_PALN_EN to 0 disables the detection of the PAL N
standard.
Setting AD_PALN_EN to 1 (default) enables the detection.
AD_PALM_EN Enable Autodetection of PAL M,
Address 0x07[2]
Setting AD_PALM_EN to 0 disables the autodetection of PAL M.
Setting AD_PALM_EN to 1 (default) enables the detection.
AD_NTSC_EN Enable Autodetection of NTSC,
Address 0x07[1]
Setting AD_NTSC_EN to 0 disables the detection of standard
NTSC.
Setting AD_NTSC_EN to 1 (default) enables the detection.
AD_PAL_EN Enable Autodetection of PAL,
Address 0x07[0]
Setting AD_PAL_EN to 0 disables the detection of standard PAL.
Setting AD_PAL_EN to 1 (default) enables the detection.
FREE_RUN
TIME_WIN
F
SC
TAKE F
LOCK
SC
LOCK INTO ACCOUNT
1
0
SELECT THE RAW LOCK SIGNAL
SRLS
FSCLE
0
1
Figure 9. Lock-Related Signal Path
Rev. B | Page 22 of 100
COUNTER OUT OF LOCK
COUNTER INTO LOCK
FILTER THE RAW LOCK SIGNAL
CIL[2:0], COL[2:0]
SFL_INV Subcarrier Frequency Lock Inversion
This bit controls the behavior of the PAL switch bit in the SFL
(GenLock Telegram) data stream. It was implemented to solve
some compatibility issues with video encoders. It solves two
problems.
First, the PAL switch bit is only meaningful in PAL. Some
encoders (including ADI encoders) also look at the state of this
bit in NTSC.
Second, there was a design change in ADI encoders from
ADV717x to ADV719x. The older versions used the SFL
(Genlock Telegram) bit directly, while the later ones invert the
bit prior to using it. The reason for this is that the inversion
compensated for the 1-line delay of an SFL (GenLock Telegram)
transmission.
As a result, ADV717x encoders need the PAL switch bit in the
SFL (Genlock Telegram) to be 1 for NTSC to work, and
ADV7190/ADV7191/ADV7194 encoders need the PAL switch
bit in the SFL to be 0 to work in NTSC. If the state of the PAL
switch bit is wrong, a 180° phase shift occurs.
In a decoder/encoder back-to-back system in which SFL is used,
this bit must be set up properly for the specific encoder used.
SFL_INV Address 0x41[6]
Setting SFL_INV to 0 makes the part SFL-compatible with
ADV7190/ADV7191/ADV7194 encoders.
Setting SFL_INV to 1 (default), makes the part SFL-compatible
with ADV717x/ADV7173x encoders.
Lock-Related Controls
Lock information is presented to the user through Bits[1:0] of
the Status 1 register. See the
section.
available to influence the way the lock status information is
generated.
F igure 9 outlines the signal flow and the controls
1 7 1 H
MEMORY
STATUS 1 [0]
STATUS 1 [1]
S TATUS_1[7:0] Address 0x10[7:0]
1 7 0 H