PIC16F877A-I/PT Microchip Technology Inc., PIC16F877A-I/PT Datasheet - Page 73

• Manufacturer Part Number: PIC16F877A-I/PT
• Description: 44 PIN, 7 KB FLASH, 368 RAM, 33 I/O
• Manufacturer: Microchip Technology Inc.

Specifications of PIC16F877A-I/PT

• A/d Inputs: 8-Channel, 10-Bit
• Comparators: 2
• Cpu Speed: 5 MIPS
• Eeprom Memory: 256 Bytes
• Input Output: 33
• Interface: I2C/SPI/USART
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 44-pin TQFP
• Programmable Memory: 14K Bytes
• Ram Size: 368 Bytes
• Speed: 20 MHz
• Timers: 2-8-bit, 1-16-bit
• Voltage, Range: 2-5.5 V
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

9.1.2
In Slave mode, the data is transmitted and received as
the external clock pulses appear on SCK. When the last
bit is latched, the interrupt flag bit SSPIF (PIR1<3>) is set.
While in Slave mode, the external clock is supplied by
the external clock source on the SCK pin. This external
clock must meet the minimum high and low times as
specified in the electrical specifications.
FIGURE 9-3:
FIGURE 9-4:
2001 Microchip Technology Inc.
SS (optional)
SCK (CKP = 0)
SCK (CKP = 1)
SDO
SDI (SMP = 0)
SSPIF
SS
SCK (CKP = 0)
SCK (CKP = 1)
SDO
SDI (SMP = 0)
SSPIF
SLAVE MODE
SPI MODE TIMING (SLAVE MODE WITH CKE = 0)
SPI MODE TIMING (SLAVE MODE WITH CKE = 1)
bit7
bit7
bit7
bit7
bit6
bit6
bit5
bit5
bit4
bit4
While in SLEEP mode, the slave can transmit/receive
data. When a byte is received, the device will wake-up
from SLEEP.
Note 1: When the SPI module is in Slave
bit3
bit3
2: If the SPI is used in Slave mode with
mode with SS pin control enabled
(SSPCON<3:0> = 0100), the SPI module
will reset if the SS pin is set to V
CKE = ’1’, then SS pin control must be
enabled.
bit2
bit2
bit1
PIC16F87X
bit1
bit0
DS30292C-page 71
bit0
bit0
bit0
DD
.