TMPM330FWFG Toshiba, TMPM330FWFG Datasheet - Page 363

• Manufacturer Part Number: TMPM330FWFG
• Description: Microcontrollers (MCU) MCU w/ ARM Cortex-M3 128K FLASH, 8K SRAM
• Manufacturer: Toshiba

Specifications of TMPM330FWFG

• Processor Series: TX03
• Core: ARM Cortex M3
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 128K
• Rom Type: Flash
• Ram (kbytes): 8K
• Number Of Pins: 100
• Package: LQFP(14×14)
• Vcc: 3V
• Cpu Mhz: 40
• Ssp (ch) Spi: -
• I2c/sio (ch): 3
• Uart/sio (ch): 3
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: -
• Cs/wait Controller (ch): -
• Dma Controller: -
• 10-bit Da Converter: -
• 10-bit Ad Converter: 12
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 10
• Motor / Igbt Control: -
• Real Time Clock: 1
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: -
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit
• Lead Free Status / Rohs Status: Details

15.4.4
A/D Conversion Modes and A/D Conversion Completion Interrupts
1.
2.
（1）Normal A/D conversion
For A/D conversion, the following four operation modes are supported. For normal A/D
conversion, an operation mode can be selected by setting ADMOD0<2:1> to an
appropriate setting. For top-priority A/D conversion, the fixed channel single conversion
mode is automatically selected, irrespective of the ADMOD0<2:1> setting.
•
•
•
•
Fixed channel single conversion mode
In this mode, A/D conversion is performed once for one channel selected. After A/D
conversion is completed, ADMOD0<EOCF> is set to "1," ADMOD0<ADBF> is cleared to
"0," and the interrupt request INTAD is generated. <EOCF> is cleared to "0" upon read.
Channel scan single conversion mode
In this mode, A/D conversion is performed once for each scan channel selected. After
A/D scan conversion is completed, ADMOD0<EOCF> is set to "1," ADMOD0<ADBF> is
cleared to "0," and the interrupt request INTAD is generated. <EOCF> is cleared to "0"
upon read.
If ADMOD0 <REPEAT, SCAN> is set to "00," A/D conversion is performed in the fixed
channel single conversion mode.
If ADMOD0 <REPET,SCAN> is set to "01," A/D conversion is performed in the channel
scan single conversion mode.
An operation mode is selected with ADMOD0<REPEAT, SCAN>. As A/D conversion
starts, ADMOD0<ADBFN> is set to "1." When specified A/D conversion is completed,
the A/D conversion completion interrupt (INTAD) is generated, and ADMOD0<EOCF>
showing the completion of A/D conversion is set to "1." If <REPEAT>="0," <ADBFN>
returns to "0" concurrently with the setting of EOCF. If <REPEAT> is set to "1," <ADBFN>
remains at "1" and A/D conversion continues.
Fixed channel single conversion mode
Channel scan single conversion mode
Fixed channel repeat conversion mode
Channel scan repeat conversion mode
Under development
Page351
TMPM330