TMPM330FWFG Toshiba, TMPM330FWFG Datasheet - Page 442

• Manufacturer Part Number: TMPM330FWFG
• Description: Microcontrollers (MCU) MCU w/ ARM Cortex-M3 128K FLASH, 8K SRAM
• Manufacturer: Toshiba

Specifications of TMPM330FWFG

• Processor Series: TX03
• Core: ARM Cortex M3
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 128K
• Rom Type: Flash
• Ram (kbytes): 8K
• Number Of Pins: 100
• Package: LQFP(14×14)
• Vcc: 3V
• Cpu Mhz: 40
• Ssp (ch) Spi: -
• I2c/sio (ch): 3
• Uart/sio (ch): 3
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: -
• Cs/wait Controller (ch): -
• Dma Controller: -
• 10-bit Da Converter: -
• 10-bit Ad Converter: 12
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 10
• Motor / Igbt Control: -
• Real Time Clock: 1
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: -
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit
• Lead Free Status / Rohs Status: Details

18 Flash Memory Operation
Under development
TMPM330
6)
ID-Read
Using the ID-Read command, you can obtain the type and other information on the flash
memory contained in the device. The data to be loaded will be different depending on the
address [15:14] of the fourth and subsequent bus write cycles (recommended input data is
0x00). On and after the fourth bus write cycle, when an arbitrary flash memory area is read,
the ID value will be loaded. Once the fourth bus write cycle of an ID-Read command has
passed, the device will not automatically return to the read mode. In this condition, the set of
the fourth bus write cycle and ID-Read commands can be repetitively executed. For returning
to the read mode, use the Read/reset command or hardware reset command.
Page430