PEB2075 INFINEON [Infineon Technologies AG], PEB2075 Datasheet - Page 232

• Manufacturer Part Number: PEB2075
• Description: ICs for Communications Extended PCM Interface Controller
• Manufacturer: INFINEON [Infineon Technologies AG]

Trunk lines connect the PBX to the central office (CO) network. Figure 81 gives an
overview of the different access possibilities to the central office.
One possibility is to use analog a/b lines. This is the most uncomplicated way since no
clock recovery from the CO is required, i.e. the PBX operates with a free running crystal
oscillator. The t/r access to the CO can easily be realized with one or several SICOFI
or SICOFI-4 codec/filter devices, which allow the connection of two or four analog lines
per chip.
If an access to the ISDN world is desired, two options are possible:
For small PBXs, with only few external lines, one or several Basic Rate ISDN (BRI)
connections are best suited. Each BRI connection provides a capacity of two B channels
of 64 kbit/s and one D channel of 16 kbit/s. The BRI connection is usually performed via
the T interface to the Network Terminator 1 (NT1). The T interface is physically identical
to the S interface, all Siemens S
be used for that purpose. A PBX can also be connected directly via the U
the CO. In this case an IEC-Q device (2B1Q encoding) or an IEC-T (4B3T encoding) can
be used as layer-1 device.
Figure 81
Overview of Trunk Line Applications
5.9.2
Semiconductor Group
PCM/Signaling
Backplane
IOM
PCM
®
-2 Trunk Line Applications
EPIC
HSCX
R
PBX Trunk Line Card
IDEC
0
IOM -2
interface devices (QUAT-S, SBCX, ISAC-S, SBC) can
P
R
R
232
SICOFI -2
SICOFI -4
SBCX
QUAT -S
FALC 54
IEC-Q
TM
R
R
R
S
T
2m
NT1
NT1
U
t/r
t/r
k
Application Hints
U
U
U
k
k2
g2
k
Central Office
- interface to
Analog
Line
Analog
Line
Basic Rate
ISDN
Basic Rate
ISDN
Primary Rate
(CEPT, T1)
PEB 2055
PEF 2055
ITS09553
-
2