S9S12G128F0VLL Freescale Semiconductor, S9S12G128F0VLL Datasheet - Page 484

• Manufacturer Part Number: S9S12G128F0VLL
• Description: 16-bit Microcontrollers - MCU 16BIT 128K FLASH
• Manufacturer: Freescale Semiconductor

Specifications of S9S12G128F0VLL

• Rohs: yes
• Core: S12
• Processor Series: MC9S12G
• Data Bus Width: 16 bit
• Maximum Clock Frequency: 1 MHz
• Program Memory Size: 128 KB
• Data Ram Size: 8 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 3.13 V to 5.5 V
• Operating Temperature Range: - 40 C to + 125 C
• Package / Case: LQFP-100
• Mounting Style: SMD/SMT
• A/d Bit Size: 10 bit, 12 bit
• A/d Channels Available: 12
• Interface Type: SPI
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Number Of Programmable I/os: 86
• Number Of Timers: 8
• Program Memory Type: Flash
• Supply Voltage - Max: 5.5 V
• Supply Voltage - Min: 3.13 V

Analog-to-Digital Converter (ADC10B12CV2)
13.3.2.8
Writes to this register will abort current conversion sequence.
Read: Anytime
Write: Anytime
486
Module Base + 0x0008
CMPE[11:0]
CC[3:0]
Reset
Field
Field
11–0
3–0
W
R
15
0
0
Conversion Counter — These 4 read-only bits are the binary value of the conversion counter. The conversion
counter points to the result register that will receive the result of the current conversion. E.g. CC3=0, CC2=1,
CC1=1, CC0=0 indicates that the result of the current conversion will be in ATD Result Register 6. If in non-FIFO
mode (FIFO=0) the conversion counter is initialized to zero at the beginning and end of the conversion sequence.
If in FIFO mode (FIFO=1) the register counter is not initialized. The conversion counter wraps around when its
maximum value is reached.
Aborting a conversion or starting a new conversion clears the conversion counter even if FIFO=1.
Compare Enable for Conversion Number n (n= 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0) of a Sequence (n conversion
number, NOT channel number!) — These bits enable automatic compare of conversion results individually for
conversions of a sequence. The sense of each comparison is determined by the CMPHT[n] bit in the ATDCMPHT
register.
For each conversion number with CMPE[n]=1 do the following:
CCF[n] in ATDSTAT2 register will flag individual success of any comparison.
0 No automatic compare
1 Automatic compare of results for conversion n of a sequence is enabled.
ATD Compare Enable Register (ATDCMPE)
= Unimplemented or Reserved
1) Write compare value to ATDDRn result register
2) Write compare operator with CMPHT[n] in ATDCPMHT register
14
0
0
13
0
0
Figure 13-10. ATD Compare Enable Register (ATDCMPE)
Table 13-16. ATDSTAT0 Field Descriptions (continued)
0
0
Table 13-17. ATDCMPE Field Descriptions
MC9S12G Family Reference Manual,
11
0
10
0
0
9
0
8
Description
Description
0
7
CMPE[11:0]
0
6
Rev.1.23
0
5
4
0
0
3
Freescale Semiconductor
0
2
0
1
0
0