MT48LC32M8A2P-7E:D Micron Technology Inc, MT48LC32M8A2P-7E:D Datasheet - Page 36

• Manufacturer Part Number: MT48LC32M8A2P-7E:D
• Description: IC SDRAM 256MBIT 133MHZ 54TSOP
• Manufacturer: Micron Technology Inc
• Type: SDRAMr

Specifications of MT48LC32M8A2P-7E:D

• Package / Case: 54-TSOP II
• Format - Memory: RAM
• Memory Type: SDRAM
• Memory Size: 256M (32M x 8)
• Speed: 133MHz
• Interface: Parallel
• Voltage - Supply: 3 V ~ 3.6 V
• Operating Temperature: 0°C ~ 70°C
• Access Time: RoHS Compliant
• Memory Case Style: TSOP
• No. Of Pins: 54
• Operating Temperature Range: 0°C To +70°C
• Operating Temperature Max: 70°C
• Operating Temperature Min: 0°C
• Organization: 32Mx8
• Density: 256Mb
• Address Bus: 15b
• Access Time (max): 5.4ns
• Maximum Clock Rate: 143MHz
• Operating Supply Voltage (typ): 3.3V
• Package Type: TSOP-II
• Operating Temp Range: 0C to 70C
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Supply Current: 135mA
• Pin Count: 54
• Mounting: Surface Mount
• Operating Temperature Classification: Commercial
• Memory Configuration: 4 BLK (8M X 8)
• Interface Type: LVTTL
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PRECHARGE
Figure 16: PRECHARGE Command
BURST TERMINATE
PDF: 09005aef8091e6d1
256Mb_sdr.pdf - Rev. N 1/10 EN
The PRECHARGE command is used to deactivate the open row in a particular bank or
the open row in all banks. The bank(s) will be available for a subsequent row access a
specified time (
whether one or all banks are to be precharged, and in the case where only one bank is
precharged, inputs BA0 and BA1 select the bank. Otherwise BA0 and BA1 are treated as
“Don’t Care.” After a bank has been precharged, it is in the idle state and must be activa-
ted prior to any READ or WRITE commands are issued to that bank.
BA0, BA1
The BURST TERMINATE command is used to truncate either fixed-length or continu-
ous page bursts. The most recently registered READ or WRITE command prior to the
BURST TERMINATE command is truncated.
Address
RAS#
CAS#
WE#
CKE
A10
CLK
CS#
HIGH
t
RP) after the PRECHARGE command is issued. Input A10 determines
Valid address
Bank address
Bank selected
All banks
36
Don’t Care
Micron Technology, Inc. reserves the right to change products or specifications without notice.
256Mb: x4, x8, x16 SDRAM
© 1999 Micron Technology, Inc. All rights reserved.
Commands