C8051F005DK Silicon Laboratories Inc, C8051F005DK Datasheet - Page 126

• Manufacturer Part Number: C8051F005DK
• Description: DEV KIT FOR F005/006/007
• Manufacturer: Silicon Laboratories Inc
• Type: MCUr

Specifications of C8051F005DK

• Contents: Evaluation Board, Power Supply, USB Cables, Adapter and Documentation
• Processor To Be Evaluated: C8051F01x
• Interface Type: USB
• Silicon Manufacturer: Silicon Labs
• Core Architecture: 8051
• Silicon Core Number: C8051F005
• Silicon Family Name: C8051F00x
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: Silicon Laboratories C8051 F005/006/007
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1188

in an “off-line” state. In a multiple-master environment, the system controller should check the state of the
SLVSEL flag (SPI0CN.2) to ensure the bus is free before setting the MSTEN bit and initiating a data transfer.
17.3.
As shown in Figure 17.4, four combinations of serial clock phase and polarity can be selected using the clock
control bits in the SPI Configuration Register (SPI0CFG). The CKPHA bit (SPI0CFG.7) selects one of two clock
phases (edge used to latch the data). The CKPOL bit (SPI0CFG.6) selects between an active-high or active-low
clock. Both master and slave devices must be configured to use the same clock phase and polarity. Note: the SPI
should be disabled (by clearing the SPIEN bit, SPI0CN.0) while changing the clock phase and polarity.
The SPI Clock Rate Register (SPI0CKR) as shown in Figure 17.7 controls the master mode serial clock frequency.
This register is ignored when operating in slave mode.
Serial Clock Timing
MISO/MOSI
SCK
(CKPOL = 0, CKPHA = 0)
SCK
(CKPOL = 0, CKPHA = 1)
SCK
(CKPOL = 1, CKPHA = 0)
SCK
(CKPOL = 1, CKPHA = 1)
NSS
Figure 17.4. Data/Clock Timing Diagram
MSB
Bit 6
Rev. 1.7
Bit 5
Bit 4
Bit 3
C8051F000/1/2/5/6/7
C8051F010/1/2/5/6/7
Bit 2
Bit 1
LSB
126