PIC12C672-10/SM Microchip Technology, PIC12C672-10/SM Datasheet - Page 59

• Manufacturer Part Number: PIC12C672-10/SM
• Description: IC MCU OTP 2KX14 A/D 8-SOIJ
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12C672-10/SM

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 10MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Size: 3.5KB (2K x 14)
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 8-SOIC (5.3mm Width), 8-SOP, 8-SOEIAJ
• For Use With: XLT08SO-1 - SOCKET TRANSITION 8SOIC 150/208AC164312 - MODULE SKT FOR PM3 16SOICISPICR1 - ADAPTER IN-CIRCUIT PROGRAMMING309-1048 - ADAPTER 8-SOIC TO 8-DIP309-1047 - ADAPTER 8-SOIC TO 8-DIPAC124001 - MODULE SKT PROMATEII 8DIP/SOIC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -
• Other names: PIC12C672-10/SMR; PIC12C672-10/SMR

1997 Microchip Technology Inc.
Some devices do not have the on-chip brown-out circuit, and in other cases there are some appli-
cations where the Brown-out Reset trip point of the device may not be at the desired level.
Figure 3-10
Each needs to be evaluated to determine if they match the requirements of the application.
Figure 3-10: External Brown-out Protection Circuit 1
Figure 3-11: External Brown-out Protection Circuit 2
Note 1: This brown-out circuit is less expensive, albeit less accurate. Transistor Q1 turns
This circuit will activate reset when V
where Vz = Zener voltage.
Note 1: Internal Brown-out Reset circuitry should be disabled when using this circuit.
2: Internal Brown-out Reset circuitry should be disabled when using this circuit.
3: Resistors should be adjusted for the characteristics of the transistor.
2: Resistors should be adjusted for the characteristics of the transistor.
off when V
and
Figure 3-11
V
DD
•
DD
R1 + R2
is below a certain level such that:
R1
are two examples of external circuitry that may be implemented.
33 k
R1
R2
V
V
DD
DD
= 0.7V
10 k
DD
40 k
goes below (Vz + 0.7V)
40 k
Q1
Q1
Section 3. Reset
PIC16CXXX
MCLR
V
MCLR
PIC16CXXX
V
DD
DD
DS31003A-page 3-9
3