PIC12C672-10/SM Microchip Technology, PIC12C672-10/SM Datasheet - Page 79

• Manufacturer Part Number: PIC12C672-10/SM
• Description: IC MCU OTP 2KX14 A/D 8-SOIJ
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12C672-10/SM

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 10MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Size: 3.5KB (2K x 14)
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 8-SOIC (5.3mm Width), 8-SOP, 8-SOEIAJ
• For Use With: XLT08SO-1 - SOCKET TRANSITION 8SOIC 150/208AC164312 - MODULE SKT FOR PM3 16SOICISPICR1 - ADAPTER IN-CIRCUIT PROGRAMMING309-1048 - ADAPTER 8-SOIC TO 8-DIP309-1047 - ADAPTER 8-SOIC TO 8-DIPAC124001 - MODULE SKT PROMATEII 8DIP/SOIC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -
• Other names: PIC12C672-10/SMR; PIC12C672-10/SMR

Table 4-1:
V
V
V
VLCDADJ
V
V
V
VREG
V
V
WR
Legend: TTL = TTL-compatible input
1997 Microchip Technology Inc.
LCD
LCD
LCD
REF
REF
REF
SS
DD
Pin Name
1
2
3
+
-
ST = Schmitt Trigger input with CMOS levels
SM = SMBus compatible input. An external resistor is required if this pin is used as an output
NPU = N-channel pull-up
No-P diode = No P-diode to V
I = input
P = Power
I/O Descriptions (Cont.’d)
Type
Pin
O
P
P
P
P
P
I
I
I
I
I
Analog
Analog
Analog
Analog
Buffer
Type
TTL
—
—
—
—
—
—
DD
Description
LCD Voltage
LCD Voltage
LCD Voltage
LCD Voltage Generation
Analog High Voltage Reference input.
DR reference voltage output on devices with comparators.
Analog High Voltage Reference input.
Usually multiplexed onto an analog pin.
Analog Low Voltage Reference input.
Usually multiplexed onto an analog pin.
This pin is an output to control the gate of an external N-FET
for voltage regulation.
Ground reference for logic and I/O pins.
Positive supply for logic and I/O pins.
Write control for parallel slave port (See CS and RD pins also).
Section 4. Architecture
CMOS = CMOS compatible input or output
PU = Weak internal pull-up
AN = Analog input or output
O = output
L = LCD Driver
DS31004A-page 4-11
4