PIC12C672-10/SM Microchip Technology, PIC12C672-10/SM Datasheet - Page 87

• Manufacturer Part Number: PIC12C672-10/SM
• Description: IC MCU OTP 2KX14 A/D 8-SOIJ
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12C672-10/SM

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 10MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Size: 3.5KB (2K x 14)
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 8-SOIC (5.3mm Width), 8-SOP, 8-SOEIAJ
• For Use With: XLT08SO-1 - SOCKET TRANSITION 8SOIC 150/208AC164312 - MODULE SKT FOR PM3 16SOICISPICR1 - ADAPTER IN-CIRCUIT PROGRAMMING309-1048 - ADAPTER 8-SOIC TO 8-DIP309-1047 - ADAPTER 8-SOIC TO 8-DIPAC124001 - MODULE SKT PROMATEII 8DIP/SOIC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -
• Other names: PIC12C672-10/SMR; PIC12C672-10/SMR

5.5
1997 Microchip Technology Inc.
Arithmetic Logical Unit (ALU)
PICmicro MCUs contain an 8-bit ALU and an 8-bit working register. The ALU is a general pur-
pose arithmetic and logical unit. It performs arithmetic and Boolean functions between the data
in the working register and any register file.
Figure 5-3: Operation of the ALU and W Register
The ALU is 8-bits wide and is capable of addition, subtraction, shift and logical operations. Unless
otherwise mentioned, arithmetic operations are two's complement in nature. In two-operand
instructions, typically one operand is the working register (W register). The other operand is a file
register or an immediate constant. In single operand instructions, the operand is either the W reg-
ister or a file register.
The W register is an 8-bit working register used for ALU operations. It is not an addressable reg-
ister.
Depending on the instruction executed, the ALU may affect the values of the Carry (C), Digit
Carry (DC), and Zero (Z) bits in the STATUS register. The C and DC bits operate as a borrow bit
and a digit borrow out bit, respectively, in subtraction. See the SUBLW and SUBWF instructions for
examples.
Literal Instructions
d = '0' or
W Register
(from instruction word)
8
ALU
8-bit literal
8
Section 5. CPU and ALU
d bit, or from instruction
d = '1'
8
8
8
8-bit register value
(from direct or indirect
address of instruction)
Register
Registers
Function
Purpose
General
Special
(SFR’s)
(GPR)
File
RAM
and
DS31005A-page 5-5
5