C8051F130-GQR Silicon Laboratories Inc, C8051F130-GQR Datasheet - Page 30

• Manufacturer Part Number: C8051F130-GQR
• Description: IC 8051 MCU 128K FLASH 100TQFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F13xr

Specifications of C8051F130-GQR

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 100MHz
• Connectivity: EBI/EMI, SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 64
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8.25K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Processor Series: C8051F1x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 8.25 KB
• Interface Type: I2C, SMBus, SPI, UART
• Maximum Clock Frequency: 100 MHz
• Number Of Programmable I/os: 64
• Number Of Timers: 5
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F120DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

C8051F120/1/2/3/4/5/6/7
C8051F130/1/2/3
1.3.
JTAG Debug and Boundary Scan
JTAG boundary scan and debug circuitry is included which provides non-intrusive, full speed, in-circuit
debugging using the production part installed in the end application, via the four-pin JTAG interface. The
JTAG port is fully compliant to IEEE 1149.1, providing full boundary scan for test and manufacturing pur-
poses.
Silicon Labs' debugging system supports inspection and modification of memory and registers, break-
points, watchpoints, a stack monitor, and single stepping. No additional target RAM, program memory, tim-
ers, or communications channels are required. All the digital and analog peripherals are functional and
work correctly while debugging. All the peripherals (except for the ADC and SMBus) are stalled when the
MCU is halted, during single stepping, or at a breakpoint in order to keep them synchronized.
The C8051F120DK development kit provides all the hardware and software necessary to develop applica-
tion code and perform in-circuit debugging with the C8051F12x or C8051F13x MCUs.
The kit includes a Windows (95 or later) development environment, a serial adapter for connecting to the
JTAG port, and a target application board with a C8051F120 MCU installed. All of the necessary commu-
nication cables and a wall-mount power supply are also supplied with the development kit. Silicon Labs’
debug environment is a vastly superior configuration for developing and debugging embedded applications
compared to standard MCU emulators, which use on-board "ICE Chips" and target cables and require the
MCU in the application board to be socketed. Silicon Labs' debug environment both increases ease of use
and preserves the performance of the precision, on-chip analog peripherals.
Silicon Labs Integrated
Development Environment
WINDOWS 95 OR LATER
JTAG (x4), VDD, GND
Serial
Adapter
TARGET PCB
C8051
F12x/13x
Figure 1.9. Development/In-System Debug Diagram
30
Rev. 1.4