MC68HC908BD48IFB Freescale Semiconductor, MC68HC908BD48IFB Datasheet - Page 92

• Manufacturer Part Number: MC68HC908BD48IFB
• Description: IC MCU 48K FLASH 6MHZ USB 44PQFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC68HC908BD48IFB

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 6MHz
• Connectivity: I²C, USB
• Peripherals: POR, PWM
• Number Of I /o: 32
• Program Memory Size: 48KB (48K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 6x8b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 44-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

System Integration Module (SIM)
7.4 Reset and System Initialization
7.4.1 External Pin Reset
Data Sheet
92
In wait mode, the CPU clocks are inactive. The SIM also produces two
sets of clocks for other modules. Refer to the wait mode subsection of
each module to see if the module is active or inactive in wait mode.
Some modules can be programmed to be active in wait mode.
The MCU has the following reset sources:
All of these resets produce the vector $FFFE–FFFF ($FEFE–FEFF in
monitor mode) and assert the internal reset signal (IRST). IRST causes
all registers to be returned to their default values and all modules to be
returned to their reset states.
An internal reset clears the SIM counter
external reset does not. Each of the resets sets a corresponding bit in
the SIM reset status register (SRSR)
Pulling the asynchronous RST pin low halts all processing. The PIN bit
of the SIM reset status register (SRSR) is set as long as RST is held low
for a minimum of 67 OSCXCLK cycles, assuming that the POR was the
source of the reset
shows the relative timing.
•
•
•
•
•
Reset Type
All others
Power-on reset module (POR)
External reset pin (RST)
Computer operating properly module (COP)
Illegal opcode
Illegal address
POR
System Integration Module (SIM)
(see Table 7-3. PIN Bit Set
Table 7-3. PIN Bit Set Timing
Number of Cycles Required to Set PIN
4163 (4096 + 64 + 3)
(see 7.8 SIM
67 (64 + 3)
(see 7.5 SIM
MC68HC908BD48
Timing).
Freescale Semiconductor
Registers).
Counter), but an
Figure 7-3
—
Rev. 2.1