XRT94L33IB-L Exar Corporation, XRT94L33IB-L Datasheet - Page 117

• Manufacturer Part Number: XRT94L33IB-L
• Description: IC MAPPER DS3/E3/STS-1 504TBGA
• Manufacturer: Exar Corporation

Specifications of XRT94L33IB-L

• Applications: Network Switches
• Interface: Bus
• Voltage - Supply: 3.14 V ~ 3.47 V
• Package / Case: 504-LBGA
• Mounting Type: Surface Mount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

xr
3-CHANNEL DS3/E3/STS-1 TO STS-3/STM-1 MAPPER IC DATA SHEET
1.1.8
The purpose of the “Transmit ATM Cell Processor” block is to read out the contents of “user” cells that have
been written into the “TxFIFO” (via the Transmit UTOPIA Interface block); and perform the following functions.
• Optionally Compute and Verify the HEC byte of each cell written into the “Transmit Cell Buffer”
• To optionally discard all incoming ATM cells that contain HEC byte errors.
• Optionally Compute and Insert the HEC byte into the fifth octet position, within each cell written into the
“Transmit ATM Cell Buffer”.
• To optionally filter User Cells (that are read out from the TxFIFO) by either discarding these User Cells, or
by replicating them and routing the copies of these cells to the Transmit Cell Extraction Buffer.
• To insert cells (residing within the Transmit Cell Insertion Buffer) into the Transmit Data Path anytime the
TxFIFO is depleted of user cells.
• Generate Idle Cells, anytime the TxFIFO and the Transmit Cell Insertion Buffer are depleted of “User” cells.
• To route the composite stream of “valid” and “idle” cells to the Transmit STS-3c POH Processor Block.
1.1.9
The purpose of the “Transmit STS-3c POH Processor” block is to perform the following functions.
•
Processor blocks and to map this data into an STS-3c SPE data-stream.
•
conditions, by the Receive STS-3c POH Processor block.
• To automatically transmit the RDI-P indicator (to the remote PTE) anytime (and for the duration that) the
corresponding Receive ATM Cell Processor block declares the LCD-P (Loss of Cell Delineation) defect
condition.
• To transmit the RDI-P indicator upon software control.
• To transmit the REI-P indicator (to the remote PTE) upon detection of B3 byte errors by the corresponding
Receive STS-3c POH Processor block.
• To transmit the REI-P indicator upon software control.
• To compute the BIP-8 value over the entire STS-3c SPE and to insert this value into the “B3-byte” position
within the very next outbound STS-3c SPE.
• To transmit the AIS-P indicator (under software control).
To receive ATM Cell or PPP data from the Transmit ATM Cell Processor or Transmit PPP Packet
To automatically transmit the RDI-P indicator (to the remote PTE) upon detection of the following
a. AIS-P
b. LOP-P
c. UNEQ-P
d. PLM-P
e. TIM-P
T
T
HE
HE
T
T
RANSMIT
RANSMIT
ATM C
STS-3
C
ELL
POH P
P
ROCESSOR
ROCESSOR
B
LOCK
B
LOCK
117
XRT94L33
Rev.1.2.0.