AGLN030V2-ZVQG100 Actel, AGLN030V2-ZVQG100 Datasheet - Page 84

• Manufacturer Part Number: AGLN030V2-ZVQG100
• Description: FPGA - Field Programmable Gate Array 30K System Gates IGLOO nano
• Manufacturer: Actel

Specifications of AGLN030V2-ZVQG100

• Processor Series: AGLN030
• Core: IP Core
• Number Of Macrocells: 256
• Maximum Operating Frequency: 250 MHz
• Number Of Programmable I/os: 77
• Supply Voltage (max): 1.5 V
• Supply Current: 6 uA
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: - 20 C
• Development Tools By Supplier: AGLN-Nano-Kit, AGLN-Z-Nano-Kit, AGL-Dev-Kit-SCS, Silicon-Explorer II, Silicon-Sculptor 3, SI-EX-TCA, FLASHPRO 4, FlashPro 3, FLASHPRO LITE
• Mounting Style: SMD/SMT
• Supply Voltage (min): 1.2 V
• Number Of Gates: 30 K
• Package / Case: VQFP-100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

IGLOO nano DC and Switching Characteristics
Clock Conditioning Circuits
Table 2-101 • IGLOO nano CCC/PLL Specification
2- 70
Parameter
Clock Conditioning Circuitry Input Frequency f
Clock Conditioning Circuitry Output Frequency f
Delay Increments in Programmable Delay Blocks
Number of Programmable Values in Each Programmable Delay Block
Serial Clock (SCLK) for Dynamic PLL
Input Cycle-to-Cycle Jitter (peak magnitude)
Acquisition Time
Tracking Jitter
Output Duty Cycle
Delay Range in Block: Programmable Delay 1
Delay Range in Block: Programmable Delay 2
Delay Range in Block: Fixed Delay
VCO Output Peak-to-Peak Period Jitter F
Notes:
1. This delay is a function of voltage and temperature. See
2. T
3. Maximum value obtained for a STD speed grade device in Worst-Case Commercial conditions. For specific junction
4. Tracking jitter is defined as the variation in clock edge position of PLL outputs with reference to PLL input clock edge.
5. VCO output jitter is calculated as a percentage of the VCO frequency. The jitter (in ps) can be calculated by multiplying
6. Measurements done with LVTTL 3.3 V 8 mA I/O drive strength and high slew rate. VCC/VCCPLL = 1.425 V,
7. SSOs are outputs that are synchronous to a single clock domain and have their clock-to-out times within ±200 ps of
8. The AGLN010, AGLN015, and AGLN020 devices do not support PLLs.
temperature and voltage supply levels, refer to
Tracking jitter does not measure the variation in PLL output period, which is covered by the period jitter parameter.
the VCO period by the % jitter. The VCO jitter (in ps) applies to CCC_OUT, regardless of the output divider settings. For
example, if the jitter on VCO is 300 ps, the jitter on CCC_OUT is also 300 ps, no matter what the settings are for the
output divider.
VCCI = 3.3 V, VQ/PQ/TQ type of packages, 20 pF load.
each other. Switching I/Os are placed outside of the PLL bank. Refer to the "ProASIC3/E SSO and Pin Placement
Guidelines" chapter of the
0.75 MHz to 50 MHz
50 MHz to 250 MHz
J
= 25°C, VCC = 1.5 V
CCC Electrical Specifications
Timing Characteristics
For IGLOO nano V2 OR V5 Devices, 1.5 V DC Core Supply Voltage
4
ProASIC3 FPGA Fabric User’s
1, 2
3
CCC_OUT
IN_CCC
1, 2
1, 2,
OUT_CCC
Table 2-6 on page 2-6
1, 2
5
LockControl = 0
LockControl = 1
LockControl = 0
LockControl = 1
Max Peak-to-Peak Jitter Data
R ev i sio n 1 1
Table 2-6 on page 2-6
Guide.
SSO ≤ 2
0.50
2.50
and
Table 2-7 on page 2-7
SSO ≤ 4
0.025
Min.
0.75
1.25
0.60
4.00
48.5
1.5
and
Table 2-7 on page 2-7
SSO ≤ 8
5,6,7
Typ.
0.80
6.00
360
3.5
for derating values.
SSO ≤ 16
15.65
15.65
12.00
Max.
1.20
250
250
300
100
51.5
6.0
2.5
1.5
32
1
for deratings.
Units
MHz
MHz
MHz
ms
ns
µs
ns
ns
%
ns
ns
ns
%
%
ps