LAN9118-MD SMSC, LAN9118-MD Datasheet - Page 20

• Manufacturer Part Number: LAN9118-MD
• Description: Ethernet ICs HiPerfrm Sngl-Chip 10/100 Ethrnt
• Manufacturer: SMSC
• Type: Single Chip MAC and PHYr

Specifications of LAN9118-MD

• Ethernet Connection Type: 10 Base-T, 100 Base-TX
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Product: Ethernet Controllers
• Number Of Transceivers: 1
• Standard Supported: 802.3
• Data Rate: 10 MB, 100 MB
• Supply Voltage (max): 3.3 V
• Supply Voltage (min): 0 V
• Maximum Operating Temperature: + 70 C
• Package / Case: TQFP-100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Revision 1.5 (07-11-08)
PIN
NO.
3,65
1,66
11
7
4
8
NAME
Reference Ground
Reference Power
Note 2.1
Core Voltage
Core Ground
PLL Ground
Decoupling
PLL Power
Please refer to the SMSC application note AN 12.5 titled “Designing with the LAN9118 -
Getting Started”. It is also important to note that this application note applies to the whole
SMSC LAN9118 family of Ethernet controllers. However, subtle differences may apply.
Table 2.5 System and Power Signals (continued)
SYMBOL
GND_CORE
VDD_CORE
VDD_REF
VSS_REF
VDD_PLL
VSS_PLL
DATASHEET
BUFFER
TYPE
20
High Performance Single-Chip 10/100 Non-PCI Ethernet Controller
P
P
P
P
P
P
NUM
PINS
2
2
1
1
1
1
DESCRIPTION
1.8 V from internal core regulator.
Both pins must be connected
together externally and then tied to a
10uF 0.1-Ohm ESR capacitor, in
parallel with a 0.01uF capacitor to
Ground next to each pin. These pins
must not be used to supply power to
other external devices. See
Ground for internal digital logic
1.8V Power from the internal PLL
regulator. This external pin must be
connected to a 10uF 0.1-Ohm ESR
capacitor, in parallel with a 0.01uF
capacitor to Ground. This pin must
not be used to supply power to other
external devices. See
GND for the PLL
Connected to 3.3v power and used
as the reference voltage for the
internal PLL
Ground for internal PLL reference
voltage
Note 2.1
SMSC LAN9118
Note 2.1
Datasheet