LAN9118-MD SMSC, LAN9118-MD Datasheet - Page 51

• Manufacturer Part Number: LAN9118-MD
• Description: Ethernet ICs HiPerfrm Sngl-Chip 10/100 Ethrnt
• Manufacturer: SMSC
• Type: Single Chip MAC and PHYr

Specifications of LAN9118-MD

• Ethernet Connection Type: 10 Base-T, 100 Base-TX
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Product: Ethernet Controllers
• Number Of Transceivers: 1
• Standard Supported: 802.3
• Data Rate: 10 MB, 100 MB
• Supply Voltage (max): 3.3 V
• Supply Voltage (min): 0 V
• Maximum Operating Temperature: + 70 C
• Package / Case: TQFP-100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

High Performance Single-Chip 10/100 Non-PCI Ethernet Controller
Datasheet
SMSC LAN9118
3.12.6.2
TX Command 'A'
Buffer End Alignment = 0
Data Start Offset = 6
First Segment = 1
Last Segment = 1
Buffer Size =183
TX Command 'B'
Packet Length = 183
TX Example 2
In this example, a single 183-Byte Ethernet packet will be transmitted. This packet is in a single buffer
as follows:
Figure 3.15, "TX Example 2" illustrates the TX command structure for this example, and also shows
how data is passed to the TX data FIFO. Note that the packet resides in a single TX Buffer, therefore
both the FS and LS bits are set in TX command ‘A’.
2-Byte “Data Start Offset”
183-Bytes of payload data
4-Byte “Buffer End Alignment”
31
Ethernet Controller
Data Written to the
6-Byte Data Start Offset
183-Byte Payload Data
TX Command 'A'
TX Command 'B'
Figure 3.15 TX Example 2
3B End Padding
DATASHEET
51
0
NOTE: Extra bytes between buffers
are not transmitted
Data Passed to the
183-Byte Payload Data
TX Data FIFO
TX Command 'A'
TX Command 'B'
Revision 1.5 (07-11-08)