MT41J256M8HX-15E:D Micron Technology Inc, MT41J256M8HX-15E:D Datasheet - Page 24

• Manufacturer Part Number: MT41J256M8HX-15E:D
• Description: MICMT41J256M8HX-15E:D 2GB:X4,X8,X16 DDR3
• Manufacturer: Micron Technology Inc
• Type: DDR3 SDRAMr
• Series: -r

Specifications of MT41J256M8HX-15E:D

• Organization: 256Mx8
• Address Bus: 18b
• Maximum Clock Rate: 1.333GHz
• Operating Supply Voltage (typ): 1.5V
• Package Type: FBGA
• Operating Temp Range: 0C to 95C
• Operating Supply Voltage (max): 1.575V
• Operating Supply Voltage (min): 1.425V
• Supply Current: 165mA
• Pin Count: 78
• Mounting: Surface Mount
• Operating Temperature Classification: Commercial
• Format - Memory: RAM
• Memory Type: DDR3 SDRAM
• Memory Size: 2G (256M x 8)
• Speed: 667MHz
• Interface: Parallel
• Voltage - Supply: 1.425 V ~ 1.575 V
• Operating Temperature: 0°C ~ 95°C
• Package / Case: 78-TFBGA
• Lead Free Status / RoHS Status: Compliant

Table 5: 96-Ball FBGA – x16 Ball Descriptions (Continued)
PDF: 09005aef826aaadc
2Gb_DDR3_SDRAM.pdf – Rev. K 04/10 EN
UDQS, UDQS#
LDQS, LDQS#
DQ[15:8]
Symbol
DQ[7:0]
V
V
UDM
V
V
V
REFDQ
REFCA
V
ZQ
NC
DDQ
SSQ
DD
SS
Reference External reference ball for output drive calibration: This ball is tied to an
Supply
Supply
Supply
Supply
Supply
Supply
Type
Input
I/O
I/O
I/O
I/O
–
Description
Input data mask: UDM is an upper-byte, input mask signal for write data. Upper-byte
input data is masked when UDM is sampled HIGH along with that input data during a
WRITE access. Although the UDM ball is input-only, the UDM loading is designed to
match that of the DQ and DQS balls. UDM is referenced to V
Data input/output: Lower byte of bidirectional data bus for the x16 configuration.
DQ[7:0] are referenced to V
Data input/output: Upper byte of bidirectional data bus for the x16 configuration.
DQ[15:8] are referenced to V
Lower byte data strobe: Output with read data. Edge-aligned with read data. Input
with write data. Center-aligned to write data.
Upper byte data strobe: Output with read data. Edge-aligned with read data. Input
with write data. DQS is center-aligned to write data.
Power supply: 1.5V ±0.075V.
DQ power supply: 1.5V ±0.075V. Isolated on the device for improved noise immunity.
Reference voltage for control, command, and address: V
tained at all times (including self refresh) for proper device operation.
Reference voltage for data: V
refresh) for proper device operation.
Ground.
DQ ground: Isolated on the device for improved noise immunity.
external 240Ω resistor (RZQ), which is tied to V
No connect: These balls should be left unconnected (the ball has no connection to the
DRAM or to other balls).
24
REFDQ
REFDQ
REFDQ
.
.
Micron Technology, Inc. reserves the right to change products or specifications without notice.
Ball Assignments and Descriptions
must be maintained at all times (excluding self
2Gb: x4, x8, x16 DDR3 SDRAM
SSQ
.
© 2006 Micron Technology, Inc. All rights reserved.
REFDQ
REFCA
.
must be main-